Ethernet shield uno mega

Description The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming in Arduino ). An SD card library is not yet included in the standard Arduino distribution. Arduino communicates with both the W and SD card using the SPI bus (through the ICSP header). This is on digital pins , and 13 on the Duemilanove and pins , and 52 on the Mega. On both boards, pin 10 is used to select the W and pin 4 for the SD card. These pins cannot be used for general i/o. On the Mega, the hardware SS pin, 53, is not used to select either the W or the SD card, but it must be kept as an output or the SPI interface won't work. Note that because the W and SD card share the SPI bus, only one can be active at a time. If you are using both peripherals in your program, this should be taken care of by the corresponding libraries. If you're not using one of the peripherals in your program, however, you'll need to explicitly deselect it. To do this with the SD card, set pin 4 as an output and write a high to it. For the W, set digital pin 10 as a high output. The shield provides a standard RJ45 ethernet jack. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Item specifics Condition: New:  A brand-new, unused and undamaged item that is fully opeartional and functions as intended. See the ...  Read more Type: Arduino Shield Dimensions (LxWxH) - Cms: Age: 12 Years+ Material: PCB Brand: Robomart Features: Battery Operated Colour: Blues Skill Development: Arduino Gender: Unisex

W ethernet shield for arduino UNO mega with micro SD slot Ethernet shield w for uno mega diecimila duemilanove Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.     Product Summary arduino w:   The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W Ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield.     Description arduino Ethernet w:             The Ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top             The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming

W ethernet shield for arduino UNO mega with micro SD slot Ethernet shield w for uno mega diecimila duemilanove     Product Summary arduino w:   The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W Ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield.     Description arduino Ethernet w:               The Ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top               The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming

Description Wiznet W Ethernet Shield for Arduino Uno & Mega with SD card slot                                      Description: Description: The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the  Ethernet library  to write sketches which connect to the internet using the shield. The ethernet shield connects to an  Arduino board  using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming

Description This is a Ethernet shield based on the Wiznet W ethernet chip,compatible with  Arduino Ethernet Shield,added support to Arduino Mega. The different between with Arduino Ethernet Shield just  Layout  of Ethernet port location. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the  Ethernet library  to write sketches which connect to the internet using the shield. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library coming

WELCOME TO ROBOCENTRAL*** *****Wiznet W Ethernet Shield For Arduino*****             ! !   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ***As These Are Real Clicked Images of the products

Wiznet W Ethernet Shield For Arduino*****             ! !   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ***As These Are Real Clicked Images of the products

Ethernet W Shield Network Expansion Board w/ Micro SD Card Slot for Arduino (Q022) Product Features:. The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board for further development. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). Ethernet shield network expansion board for Arduino. The Arduino ethernet shield allows an Arduino board to connect to the internet It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. Requires an Arduino board (not included). Operating Voltage 5V (supplied from the Arduino Board) Product Features The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board for further development There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). Ethernet shield network expansion board for Arduino The Arduino ethernet shield allows an Arduino board to connect to the internet It is based on the Wiznet W ethernet chip (datasheet) The Wiznet W provides a network (IP) stack capable of both TCP and UDP It supports up to four simultaneous socket connections Use the Ethernet library to write sketches which connect to the internet using the shield Requires an Arduino board (not included) Operating Voltage 5V (supplied from the Arduino Board) Ethernet Controller W with internal 16K buffer Connection Speed Mb Connection with Arduino on SPI port

Arduino sensor shield V5.0 for arduino MEGA UNO DUEMILANOVE. + Free 15 piece Dupont cables worth Rs.90 Description sensor shield V5.0: ·         This is an Arduino Uno, mega, duemilanove compatible sensor shield that allows you to plug sensor modules into the Arduino through the shield just like Lego blocks. The board has different pin groupings for the different types of connections that it supports. The last picture of the gallery explains the connections available. This shield will simplify all of your sensing projects by creating a platform on the Arduino that the sensors can plug into without using a breadboard and discrete components. ·         Dimensions: Depth 57mm, Height 19mm, Width 57mm ·         Weight:25g   Summary: ·         I2C interface ·         Bluetooth module communication interface ·         SD card module communication interface ·         APC220 wireless RF modules communication interface ·         RB URF V1.1 ultrasonic sensors interface ·         LCD serial and parallel interface ·         32 servo controller interface Package Include: ·         1 x sensor shield V5.0 ·         5 x Dupont female to female cables. ·         5 x Dupont male to female cables. ·         5 x Dupont male to male cables. ·         A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

L293D Arduino multi-motor control shield for arduino UNO Compatible with UNO, Mega, Diecimila & Duemilanove Product Summary:   ·         The shield contains two L293D motor drivers and one 74HC595 shift register. ·         The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers. ·         The output enable of the L293D is directly connected to PWM outputs of the Arduino. ·         The Motor Shield is able to drive 2 servo motors, and has 8 half-bridge outputs for 2 stepper motors or 4 full H-bridge motor outputs or 8 half-bridge drivers, or a combination.   Description: ·         2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!  ·         Up to 4 bi-directional DC motors with individual 8-bit speed selection (about 0.5% resolution)  ·         Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.  ·         4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to12V  ·         Pull down resistors keep motors disabled during power-up  ·         Big terminal block connectors to easily hook up wires (AWG) and power  ·         Arduino reset button brought up top ·         2-pin terminal block to connect external power, for seperate logic/motor supplies  ·         compatible with UNO,Mega, Diecimila, & Duemilanove ·         Dimensions: 69mm x 53mm x 14.3mm (2.7in x 2.1in x 0.6in)   Package Include: ·         1pc. L293D Arduino multi-motor control shield Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

Internet of Things (IOT) Starter Kit * With Arduino Mega (More functions compared to Arduino UNO R3) * W Ethernet Shield (Connect Arduino to Internet / Cloud without PC) * Temperature Sensor * Light Sensor * 4 digit 7 segment display * Breadboard * DUPONT Jumper cables x 20 * Relay 5v * Trim pot 10k * Transistor 2N * Diode 1N * Resistor 220 ohm x 10 * Resistor 10k x 10 * Red, Green and Yellow LEDs (3 + 3 + 1) * DC Power Adapter (9v 1A) * Network Cable RJ 45 * USB Cable (Type A - B) * Quick Component Reference book (Hard copy) * Companion CD with ready to use code * 15 Exciting IOT projects with step-by-step instructions [e.g., Control Home lights with mobile phone, e-mail alert, Twitter post from Arduino, saving sensor data

This is a 16x2 LCD Keypad module for Arduino Diecimila Duemilanove, UNO, MEGA, MEGA board. Blue Backlight with white words, adjustable backlighting 4 Bit Arduino LCD Library The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a white character blue backlight LCD. The keypad consists of 5 keys - select, up, right, down and left. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a 5 stage voltage divider.

WELCOME TO ROBOCENTRAL***    ***IMPORTED DC- DC Buck Converter ***             ! !   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ****DESCRIPTION**** Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects. !!!SPECIFICATION!!! 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.  4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to12V  Pull down resistors keep motors disabled during power-up  Big terminal block connectors to easily hook up wires (AWG) and power  Arduino reset button brought up top 2-pin terminal block to connect external power, for seperate logic/motor supplies  Tested compatible with UNO,Mega, Diecimila, & Duemilanove Dimensions(assembled): 69mm x 53mm x 14.3mm (2.7in x 2.1in x 0.6in) Package Contains  1 X L293D Motor Control Shield      we value your needs           So usually ship within same business day except Sunday or public holiday's          WE AIM AT PROVIDING BEST QUALITY PRODUCT S                    ***AT LOWEST POSSIBLE RATES ***                      * **WE  USE QUALITY SHIPPING ONLY***           (TO ENSURE THAT THE PRODUCT REACHES YOU AT THE EARLIEST)         YOUR FEEDBACK IS HIGHLY VALUABLE FOR OUR BUSINESS TO GROW   **PLEASE LEAVE US THE BEST 5(STAR) RATINGS**      *********ONCE YOUR ARE SATISFIED*********   In case of any claim or complaints please contact us before leaving any neutral or negative feedback    ****And we will try our best to resolve your issue****    For Any Queries Please Call us on: / .   OR    You can email us at:            "DON'T WORRY BUY WITH CONFIDENCE"        !!!THANK'S FOR  GIVING US YOUR VALUABLE TIME!!!            **PLEASE VISIT AGAIN**

Sensor Shield V4 Digital Analog Module For Arduino Duemilanove / UNO / MEGA 100% brand new and high quality. Quantity:1pc 　 Size: 70mm x 56mm/2.73"x 2.18''(inch) (approx) 　 Buckled Communication Port: Selectable between I2C and UARt. 　 Analog IO Port: 2.54 grid male pin header connections. 　 Digital IO port: 13 ports prepared to digital modules or servos. 　 Buckled Analog Port: Handy, solid connection to 6 Analog inputs with VCC/GND. 　 Input Voltage (limits): 6-20VDC. 　 Input Voltage (recommended): 7-12VDC. 　 Operating Voltage: 5VDC Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking. ---1 PC package