Gsm motor control phase

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user Description - The unit can be used to control Motor: SINGLE PHASE MOTORS The unit can be operated using Missed call / SMS / Mobile APP  / Acknowlegement  USERS CAN CONFIGURE THE MOBILE APP FOR MOTOR ON /MOTOR OFF                              The unit is a well established and researched unit that suits human needs. people want comfort and convenience while they are remotely located.   Working Principle: The unit contains a SIM card Slot, where a Customer owned SIM card has to be inserted. We will also send you the complete installation manual for inserting SIM card into the device and for configuring the mobile APP MOBILE APP: The mobile App buttons can be configured to switch ON / OFF the motor. MISSED CALL: 1. The Customer can call the SIM card number

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user Description - The unit can be used to control Motor:  3 Phase / Submersible STARTER TYPE MOTORS The unit can be operated using Missed call / SMS / Mobile APP  / Acknowlegement  USERS CAN CONFIGURE THE MOBILE APP FOR MOTOR ON /MOTOR OFF                              The unit is a well established and researched unit that suits human needs. people want comfort and convenience while they are remotely located.   Working Principle: The unit contains a SIM card Slot, where a Customer owned SIM card has to be inserted. We will also send you the complete installation manual for inserting SIM card into the device and for configuring the mobile APP MOBILE APP: The mobile App buttons can be configured to switch ON / OFF the motor. MISSED CALL: 1. The Customer can call the SIM card number

Specifications: GSM SIM900A USB SHIELD GSM/GPRS Module: SIMCOM SIM900A On board Interfaces USB (usb to serial using CP) RS232 with MAX232 TTL pin breakout (RXD,TXD,GND) SIM 900A GSM GPRS Module feature General features •Dual-Band MHz •GPRS multi-slot class 10/8 •GPRS mobile station class B •Compliant to GSM phase 2/2+ – Class 4 (2 W @900 MHz) – Class 1 (1 W @ MHz) •SAIC (Single Antenna Interference Cancellation) support •Dimensions: mm •Weight: 3.4g •Control via AT commands (GSM and SIMCOM enhanced AT Commands) •SIM application toolkit •Supply voltage range : V •Low power consumption: 1.0mA(sleep mode&BS -PA-MFRMS=9) •Operation temperature: -40°C to +85 °C Default Settings on the board The baud rate is set to when we ship the board. You may change it with AT+IPR = . The echo of characters is turned on by default. Downloads SIM 900 AT commands SIM900_AT_Command_Manual_V1.03.pdf USB Driver To connect GSM Modem with computer USB driver is required, please download from Silicon Labs website. GUI for windows Xplore GSM is a Windows GUI and command line software that can be used to test and evaluate the GSM USB Shield.

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. Aslb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one aslb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, aslb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. Aslb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. Aslb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs 1600 step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. A3967slb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one a3967slb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, a3967slb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. A3967slb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. A3967slb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Description L298N is a kind of high voltage, high current motor driver chip produced by ST company. Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V), large output current(instantaneous peak current up to 3A, continuous working current 2A) and 25W of rated power. Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor, relay coil and so on. Using standard logic level signal control, it has two enable control ends. It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage. The chip can connects to external detecting resistor to give the variations to the control circuit. Using L298N chip to drive the motor, this chip can drive a stepping motor or four phase stepping motor, and two DC motors as well. Features： Using L298N made by ST company as the control chip,the module has such characteristics as strong driving  ability, low calorific value and strong anti-interference ability. This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage  of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage. Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability Specification Double H bridge drive Chip L298N (ST NEW) Logical voltage 5V Drive voltage 5V-35V Logical current 0mA-36mA Drive current 2A(MAX single bridge) Storage temperature -20 to +135 Max power 25W Weight 30g Size:mm Applied cases: 1) Driving stepper motor The connection of driving a common 4 line 2 phase electric motor is shown

Description: Dual band (900MHz/MHz) GSM/GPRS Modem with very advance SIM900/Sim900A GSM module. The modem follows plug and play operation with on board RS232 interface for communication and follows standard AT command set. Advantage of using this modem will be that you can use its RS232 port to communicate and develop embedded applications. Applications like SMS Control, data transfer, remote control and logging can be developed easily. The modem can either be connected to PC serial port directly or to any microcontroller. It can be used to send and receive SMS or make/receive voice calls. It can also be used in GPRS mode to connect to internet and do many applications for data logging and control. In GPRS mode you can also connect to any remote FTP server and upload files for data logging. Supports features like Voice, SMS, Data / Fax, GPRS and integrated TCP/IP stack. It works on frequencies EGSM 900Mhz, DCS MHz and PCSMhz. Specification: Data / Fax, SMS, GPRS - Integrated TCP / IP stack Features - Quad Band GSM / GPRS MHz - GPRS multi - slot class 10 / 8 GPRS Mobile station class B Compliant to GSM Phase 2 / 2 + Class 4 (2W@ MHz) Class 1 (1W@ MHz) - Control via AT commands (GSM and enhanced AT commands) - Operation Temperature (-20 deg C to +55 deg C) Specifications for Voice Triode. - Half rate (HR) Full rate (FR) Enhanced Full rate (EFR) Hands-free operation(Echo suppression) Specifications for Fax Group 3 - class 1 Specifications for data GPRS class 10: max 85.6 kbps (downlink) - PBCCH support Coding schemes CS CSD up to 14.4 kbps USSD Non transparent mode PPP - Stack We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Easy Driver Stepmotor Description EasyDriver Shield stepping Stepper Motor Driver V44   Description  • The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A are broken out allowing adjustments to the microstepping resolution.. Features • Compatible with 4, 6, and 8 wire stepper motors of any voltage  • Adjustable current control from 150mA/phase to 750mA/phase  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)  • Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds Package Info 1 X PC Easy Step Driver Shield with pins. Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Easy Driver Stepmotor Description EasyDriver Shield stepping Stepper Motor Driver V44   Description  • The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution.. Features • Compatible with 4, 6, and 8 wire stepper motors of any voltage  • Adjustable current control from 150mA/phase to 750mA/phase  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)  • Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds Package Info 1 X PC Easy Step Driver Shield with pins. Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

The DRV stepper motor driver carrier is a breakout board for TI’s DRV microstepping bipolar stepper motor driver. The DRV features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from  V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). This product is a carrier board or breakout board for TI’s DRV stepper motor driver; we therefore recommend careful reading of the DRV datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil (see the Power Dissipation Considerations section below for more information). Here are some of the driver’s key features: Simple step and direction control interface Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 45 V maximum supply voltage Built-in regulator (no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout Short-to-ground and shorted-load protection 4-layer, 2 oz copper PCB for improved heat dissipation Exposed solderable ground pad below the driver IC on the bottom of the PCB This product ships with all surface-mount components—including the DRV driver IC—installed as shown

it is a variable frequency drive to control speed of three phase induction motor. It is for last year electrical students. i will give all required reports like last year both semester final report + ppr + psar +ieee format +canvas + ppt,etc.For any query u can call me.

n Unipolar 4-Phase Stepper Motor Controller Board will help you control a Stepper Motor or 4 individual Solenoids. Box Header (IDC) connector provides for easy interfacing option Separate LED indicator for individual Phase Screw terminal connector for easy connection of output load and power supply input Power-On LED indicator Four mounting holes of 3.2 mm each PCB dimensions 86 mm x 49 mm

Stepstick A4988 is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection. This stepper motor driver lets you control one  bipolar stepper motor  at up to 2 A output current per coil. Here are some of the driver’s key features: Simple step and direction control interface Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection Short-to-ground and shorted-load protection  Specifications: Minimum operating voltage:            8 V Maximum operating voltage:         35 V Continuous current per phase:      1 A2 Maximum current per phase:        2 A3 Minimum logic voltage:                3 V Maximum logic voltage:               5.5 V Microstep resolutions:       full, 1/2, 1/4, 1/8, and 1/16  

Company Name: Naksh Researcher & Designer Centre Company Type: Hardware & Software Design in Electronics & Electrical Company Service Area: Microcontroller Based Electronics Projects, Readymade Electronics & Electrical Projects, Electronics IEEE Projects, Electronics Project list, , AVR, PIC Microcontroller, GSM, RFID, DTMF, Robotics, Touch Screen Based Projects, Real Time Electronics Projects, Final Year Electronics Projects, Major & Minor Electronics Projects Electronics & Communication Engineering Projects, Electronics & Electrical Engineering Projects, Electronics Hardware & Software Projects Final Year Major & Minor Projects Field 1. RFID Based Projects 2. DTMF Based Projects 3. GSM Based Projects 4. GPS Based Projects 5. Display Based Projects 6. Robotics Based Projects 7. Remote Control Based Projects 8. Wireless Control Projects 9. Zigbee/Bluetooth Projects 10. Automation Projects 11. Security & Surveillance Projects 12. SCADA Based Projects Keywords Microcontroller , AVR, PIC, LCD, Sensors, Relay, LED, Rectifier, Potentiometer, Resistance, capacitor, Memory, RAM, ROM, UART, RS232, SPI, ADC, Temperature, Accelerometer, RS485, CAN, LIN, I2C, Robotics, GSM 900A, SIM300, GPS, DTMF, Antenna, Wireless, RF Module, Bluetooth, DC motor, stepper Motor, Power supply, regulators etc If you have any idea for any project please feel free to contact us. Contact No: (Mobile), (Land Line)

1 Paper Dona, Plate, Thali Die Size Support 4” to 12” 2 Paper Material Used 80 Gsm to 180 Gsm 3 Production 2600 to 4000 pcs/hous (Depending on Paper size & GSM) 4 Power Sorce 220V – 50 Hz 5 Electric Motor 1hp- 1440 rpm (Single Phase) (1 Year Guaranty) 6 Weight Of Machine 450 Kg Approx 7 Power Consumption with Heater 1 to 1.5 Unit/Hr. Approx 8 Size Of Machine 27” X 50” X 68”