Gsm motor control

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user Description - The unit can be used to control Motor: SINGLE PHASE MOTORS The unit can be operated using Missed call / SMS / Mobile APP  / Acknowlegement  USERS CAN CONFIGURE THE MOBILE APP FOR MOTOR ON /MOTOR OFF                              The unit is a well established and researched unit that suits human needs. people want comfort and convenience while they are remotely located.   Working Principle: The unit contains a SIM card Slot, where a Customer owned SIM card has to be inserted. We will also send you the complete installation manual for inserting SIM card into the device and for configuring the mobile APP MOBILE APP: The mobile App buttons can be configured to switch ON / OFF the motor. MISSED CALL: 1. The Customer can call the SIM card number

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user Description - The unit can be used to control Motor:  3 Phase / Submersible STARTER TYPE MOTORS The unit can be operated using Missed call / SMS / Mobile APP  / Acknowlegement  USERS CAN CONFIGURE THE MOBILE APP FOR MOTOR ON /MOTOR OFF                              The unit is a well established and researched unit that suits human needs. people want comfort and convenience while they are remotely located.   Working Principle: The unit contains a SIM card Slot, where a Customer owned SIM card has to be inserted. We will also send you the complete installation manual for inserting SIM card into the device and for configuring the mobile APP MOBILE APP: The mobile App buttons can be configured to switch ON / OFF the motor. MISSED CALL: 1. The Customer can call the SIM card number

This is driving module is a common DC motor, using 293D chip low current DC motor drive chip. Pins are made of Arduino compatible, also facilitate the lovers rapid development based on Arduino. 2 5V servo motor (servo) port to the Arduino high resolution and high precision timer - no jitter! 1, as many as 4 bidirectional DC motor and 4 PWM speed (approximately 0.5% of the resolution) 2, as many as 2 stepper motor control, single / double step control, staggered or subdivided and rotation angle control. 3, 4: L293D H- bridge chip each Luqiao.0.6A (peak 1.2A) current and a thermal power protection, 4.5V to 36V. 4, pull down resistor maintain the motor stop status

WELCOME TO ROBOCENTRAL***    ***IMPORTED DC- DC Buck Converter ***             ! !   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ****DESCRIPTION**** Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects. !!!SPECIFICATION!!! 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.  4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to12V  Pull down resistors keep motors disabled during power-up  Big terminal block connectors to easily hook up wires (AWG) and power  Arduino reset button brought up top 2-pin terminal block to connect external power, for seperate logic/motor supplies  Tested compatible with UNO,Mega, Diecimila, & Duemilanove Dimensions(assembled): 69mm x 53mm x 14.3mm (2.7in x 2.1in x 0.6in) Package Contains  1 X L293D Motor Control Shield      we value your needs           So usually ship within same business day except Sunday or public holiday's          WE AIM AT PROVIDING BEST QUALITY PRODUCT S                    ***AT LOWEST POSSIBLE RATES ***                      * **WE  USE QUALITY SHIPPING ONLY***           (TO ENSURE THAT THE PRODUCT REACHES YOU AT THE EARLIEST)         YOUR FEEDBACK IS HIGHLY VALUABLE FOR OUR BUSINESS TO GROW   **PLEASE LEAVE US THE BEST 5(STAR) RATINGS**      *********ONCE YOUR ARE SATISFIED*********   In case of any claim or complaints please contact us before leaving any neutral or negative feedback    ****And we will try our best to resolve your issue****    For Any Queries Please Call us on: / .   OR    You can email us at:            "DON'T WORRY BUY WITH CONFIDENCE"        !!!THANK'S FOR  GIVING US YOUR VALUABLE TIME!!!            **PLEASE VISIT AGAIN**

Description Package Includes: 1 Piece new  L293D Arduino Motor Control Shield It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  L293D Arduino Motor Control Shield It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Special Scheme BUY 4 GET 1 FREE The All new Motor Driver Shield for your Arduino. It can run 2 servo or 2 stepper or 4 DC motor with the help of external power supply and controlling via arduino. Versatile product comes from adafruit. --  2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution      dedicated timer - no jitter! --  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%      resolution) --  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or      micro-stepping. --  4 H-Bridges: L293D chip set provides 0.6A per bridge (1.2A peak) with thermal shutdown      protection, 4.5V to 25V --  Pull down resistors keep motors disabled during power-up --  Big terminal block connectors to easily hook up wires (AWG) and power --  Arduino reset button brought up top --  2-pin terminal block to connect external power, for separate logic/motor supplies --  Tested compatible with Mega, Diecimila, & Duemilanove now, first time Made

Mobile APP WE REALSED... No need to remember codes just easy use.... The GSM-AUTO is a GSM remote control switch, it connects to the cell phone network and like a cell phone has its own cell phone number. The GSM-AUTO is activated by Sending SMS to its cell phone number, it will recognise an authorised telephone number It has 6 independent relay switches with normally open and normally closed switch contacts, these can be programmed to switch on and Off By Sending SMS R1 R2 R3....  The relay switches can also be switched on or off by sending the GSM-AUTO a sms text message command. It can report the relay status by sending back a text message. Applications   Applications are endless and include the remote control of heating and air conditioning

L293D is a monolithic integrated, high voltage, high current, 4-channel driver,you can use DC motors and power supplies of up to 36 Volts, the L293D chip is also known as a type of H-Bridge,which is typically an electrical circuit that enables a voltage to be applied across a load

Specifications: GSM SIM900A USB SHIELD GSM/GPRS Module: SIMCOM SIM900A On board Interfaces USB (usb to serial using CP) RS232 with MAX232 TTL pin breakout (RXD,TXD,GND) SIM 900A GSM GPRS Module feature General features •Dual-Band MHz •GPRS multi-slot class 10/8 •GPRS mobile station class B •Compliant to GSM phase 2/2+ – Class 4 (2 W @900 MHz) – Class 1 (1 W @ MHz) •SAIC (Single Antenna Interference Cancellation) support •Dimensions: mm •Weight: 3.4g •Control via AT commands (GSM and SIMCOM enhanced AT Commands) •SIM application toolkit •Supply voltage range : V •Low power consumption: 1.0mA(sleep mode&BS -PA-MFRMS=9) •Operation temperature: -40°C to +85 °C Default Settings on the board The baud rate is set to when we ship the board. You may change it with AT+IPR = . The echo of characters is turned on by default. Downloads SIM 900 AT commands SIM900_AT_Command_Manual_V1.03.pdf USB Driver To connect GSM Modem with computer USB driver is required, please download from Silicon Labs website. GUI for windows Xplore GSM is a Windows GUI and command line software that can be used to test and evaluate the GSM USB Shield.

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user Description - The unit can be used to control 8 Home Appliances:  12 Home Appliance Control The unit can be operated using Missed call / SMS / Mobile APP  / Acknowlegement  USERS CAN CONFIGURE THE MOBILE APP FOR  12 device control                              The unit is a well established and researched unit that suits human needs. people want comfort and convenience while they are remotely located.   Working Principle: The unit contains a SIM card Slot, where a Customer owned SIM card has to be inserted. We will also send you the complete installation manual for  inserting SIM card into the device and for configuring the mobile APP MOBILE APP: The mobile App buttons can be configured to switch ON / OFF 8 devices SMS OPERATION: 1.The customer has to send SMS to the Sim card number(SMS "R1"- device 1 ON/ SMS Acknowledgement  option can be On/Off) 2.  The customer has to send SMS to the Sim card number(SMS "O1"- device 1 OFF/ SMS Acknowledgement  option can be On/Off) Similary "R2" for Second Device ON Similary "O2" for Second Device OFF Package Contents: 1)  1 no GSM Home  Appliance Controlling Device 2)   Installation  Instruction and working procedure Manual Ready Stock - will be dispatched immediately as payment is made to Terms & Conditions: 100% replacement No additional charges after purchase from e-Bay Delivery anywhere

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user Description - The unit can be used to control 8 Home Appliances:  8 Home Appliance Control The unit can be operated using Missed call / SMS / Mobile APP  / Acknowlegement  USERS CAN CONFIGURE THE MOBILE APP FOR  8 device control                              The unit is a well established and researched unit that suits human needs. people want comfort and convenience while they are remotely located.   Working Principle: The unit contains a SIM card Slot, where a Customer owned SIM card has to be inserted. We will also send you the complete installation manual for  inserting SIM card into the device and for configuring the mobile APP MOBILE APP: The mobile App buttons can be configured to switch ON / OFF 8 devices SMS OPERATION: 1.The customer has to send SMS to the Sim card number(SMS "R1"- device 1 ON/ SMS Acknowledgement  option can be On/Off) 2.  The customer has to send SMS to the Sim card number(SMS "O1"- device 1 OFF/ SMS Acknowledgement  option can be On/Off) Similary "R2" for Second Device ON Similary "O2" for Second Device OFF Package Contents: 1)  1 no GSM Home  Appliance Controlling Device 2)   Installation  Instruction and working procedure Manual Ready Stock - will be dispatched immediately as payment is made to Terms & Conditions: 100% replacement No additional charges after purchase from e-Bay Delivery anywhere

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user Description - The unit can be used to control 4 Home Appliances:  4 Home Appliance Control The unit can be operated using Missed call / SMS / Mobile APP  / Acknowlegement  USERS CAN CONFIGURE THE MOBILE APP FOR  4 device control                              The unit is a well established and researched unit that suits human needs. people want comfort and convenience while they are remotely located.   Working Principle: The unit contains a SIM card Slot, where a Customer owned SIM card has to be inserted. We will also send you the complete installation manual for  inserting SIM card into the device and for configuring the mobile APP MOBILE APP: The mobile App buttons can be configured to switch ON / OFF 4 devices SMS OPERATION: 1.The customer has to send SMS to the Sim card number(SMS "R1"- device 1 ON/ SMS Acknowledgement  option can be On/Off) 2.  The customer has to send SMS to the Sim card number(SMS "O1"- device 1 OFF/ SMS Acknowledgement  option can be On/Off) Similary "R2" for Second Device ON Similary "O2" for Second Device OFF Package Contents: 1)  1 no GSM Home  Appliance Controlling Device 2)   Installation  Instruction and working procedure Manual Ready Stock - will be dispatched immediately as payment is made to Terms & Conditions: 100% replacement No additional charges after purchase from e-Bay Delivery anywhere

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user Description - The unit can be used to control upto 16 home appliances                              The unit is a well established and researched unit that suits human needs. people want comfort and convenience while they are remotely located.  Using this device any 16 home appliances can be controlled remotely. Working Principle: The unit contains a SIM card Slot, where a Customer owned SIM card has to be inserted. We will also send you the complete installation manual for inserting SIM card into the device 1.The customer has to send SMS to the Sim card number(SMS "R1"- device 1 ON/ Acknowledgement  option can be On/Off) 2.  The customer has to send SMS to the Sim card number(SMS "O1"- device 1 OFF/ Acknowledgement  option can be On/Off) 3. Similarly by varying the numbers R2..R3 all connected appliances can be activated. Applications: 1. It can be used for individual loads upto watts. For more greater loads we can able to do customization as per customer requirement. Package Contents: 1)  1 no  GSM  Home controlling device 2)   Installation  Instruction and working procedure Manual Ready Stock - will be dispatched immediately as payment is made to Terms & Conditions: 100% replacement No additional charges after purchase from e-Bay Delivery anywhere

QUALITY PRODUCT: LOWEST PRICE: Benefit to the end user Description - The unit can be used to control upto 8 home appliances                              The unit is a well established and researched unit that suits human needs. people want comfort and convenience while they are remotely located.  Using this device any 8 home appliances can be controlled remotely. Working Principle: The unit contains a SIM card Slot, where a Customer owned SIM card has to be inserted. We will also send you the complete installation manual for inserting SIM card into the device 1.The customer has to send SMS to the Sim card number(SMS "R1"- device 1 ON/ Acknowledgement  option can be On/Off) 2.  The customer has to send SMS to the Sim card number(SMS "O1"- device 1 OFF/ Acknowledgement  option can be On/Off) 3. Similarly by varying the numbers R2..R3 all conencted appliances can be activated. Applications: 1. It can be used for individual loads upto watts. For more greater loads we can able to do customization as per customer requirement. Package Contents: 1)  1 no  GSM  Home controlling device 2)   Installation  Instruction and working procedure Manual Ready Stock - will be dispatched immediately as payment is made to Terms & Conditions: 100% replacement No additional charges after purchase from e-Bay Delivery anywhere