Mega uno based bluetooth

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 3.3 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

Arduino sensor shield V5.0 for arduino MEGA UNO DUEMILANOVE. + Free 15 piece Dupont cables worth Rs.90 Description sensor shield V5.0: ·         This is an Arduino Uno, mega, duemilanove compatible sensor shield that allows you to plug sensor modules into the Arduino through the shield just like Lego blocks. The board has different pin groupings for the different types of connections that it supports. The last picture of the gallery explains the connections available. This shield will simplify all of your sensing projects by creating a platform on the Arduino that the sensors can plug into without using a breadboard and discrete components. ·         Dimensions: Depth 57mm, Height 19mm, Width 57mm ·         Weight:25g   Summary: ·         I2C interface ·         Bluetooth module communication interface ·         SD card module communication interface ·         APC220 wireless RF modules communication interface ·         RB URF V1.1 ultrasonic sensors interface ·         LCD serial and parallel interface ·         32 servo controller interface Package Include: ·         1 x sensor shield V5.0 ·         5 x Dupont female to female cables. ·         5 x Dupont male to female cables. ·         5 x Dupont male to male cables. ·         A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment. Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 10 x Interface Base Board Module For Further Details: Email:

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software No need to install any additional driver

Sensor Shield V2.0 for Arduino MEGA R IIC Bluetooth LCD SD IO + Free 30 piece Dupont cables worth Rs.% compatible with Arduino mega   Product Summary: Arduino mega sensor shield V2.0 is easy for Arduino fans to plug and play with. For some Arduino starters, it is difficult to add circuits on Arduino, so this sensor expansion board which can connect most senor shields to Arduino control panel solves the problem easily. It meets the expansion needs of most Arduino. Arduino is an open-source physical computing platform based on a simple i/o board and a development environment. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer Specifications: Dimensions 3.94

Sensor Shield V2.0 for Arduino MEGA R IIC Bluetooth LCD SD IO + Free 30 piece Dupont cables worth Rs.% compatible with Arduino mega   Product Summary sensor shield v2.0:   Arduino mega sensor shield V2.0 is easy for Arduino fans to plug and play with. For some Arduino starters, it is difficult to add circuits on Arduino, so this sensor expansion board which can connect most senor shields to Arduino control panel solves the problem easily. It meets the expansion needs of most Arduino. Arduino is an open-source physical computing platform based on a simple i/o board and a development environment. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer   Specifications: Dimensions 3.94

W ethernet shield for arduino UNO mega with micro SD slot Ethernet shield w for uno mega diecimila duemilanove Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.     Product Summary arduino w:   The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W Ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield.     Description arduino Ethernet w:             The Ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top             The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming

W ethernet shield for arduino UNO mega with micro SD slot Ethernet shield w for uno mega diecimila duemilanove     Product Summary arduino w:   The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W Ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield.     Description arduino Ethernet w:               The Ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top               The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming

Description Wiznet W Ethernet Shield for Arduino Uno & Mega with SD card slot                                      Description: Description: The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the  Ethernet library  to write sketches which connect to the internet using the shield. The ethernet shield connects to an  Arduino board  using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming

Description The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming in Arduino ). An SD card library is not yet included in the standard Arduino distribution. Arduino communicates with both the W and SD card using the SPI bus (through the ICSP header). This is on digital pins , and 13 on the Duemilanove and pins , and 52 on the Mega. On both boards, pin 10 is used to select the W and pin 4 for the SD card. These pins cannot be used for general i/o. On the Mega, the hardware SS pin, 53, is not used to select either the W or the SD card, but it must be kept as an output or the SPI interface won't work. Note that because the W and SD card share the SPI bus, only one can be active at a time. If you are using both peripherals in your program, this should be taken care of by the corresponding libraries. If you're not using one of the peripherals in your program, however, you'll need to explicitly deselect it. To do this with the SD card, set pin 4 as an output and write a high to it. For the W, set digital pin 10 as a high output. The shield provides a standard RJ45 ethernet jack. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description This is a Ethernet shield based on the Wiznet W ethernet chip,compatible with  Arduino Ethernet Shield,added support to Arduino Mega. The different between with Arduino Ethernet Shield just  Layout  of Ethernet port location. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the  Ethernet library  to write sketches which connect to the internet using the shield. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library coming

Overview The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards

Meet the Espressif ESP32, a much-awaited sequel of the very popular ESP8266 SoC. This time around Espressif has given it a ton of integrated feature-rich peripherals. The CPU(s) is also upgraded with two individual cores from  Tensilica, each running at up to 240 MHz. Two because one takes care of the Wi-Fi and Bluetooth stacks' computational requirements and the other one dedicated for the application. This is just a lot of power waiting to be unleashed and still works on very low power for IoT applications. We are very excited with the capability of this chip and waiting to find more applications for it. At the time of writing this document, the support for ESP32 in Arduino is still kind of patchy, however Espressif has an excellent development toolchain based on the Xtensa toolchain for Tensilica controllers. We love using  Epressif's ESP-IDF toolchain and framework, it includes a great set of libraries. It works on Windows, MACOS and Linux. We use it on Ubuntu and it works like a charm. Note:  This product is still undergoing complete software testing for the various capabilities. Watch this page for more updates as we keep adding features in software for this. Note:  The Arduino core for ESP32 is still under development, so with the current state of the software, this board may not be a drop-in replacement for an Arduino. This feature should be available soon though. Features: On-board ESP32 System-On-Chip (SoC) featuring: Two   Tensilica  LX6 microcontroller cores running at 240 MHz, with 520 KB RAM !! Integrated Wi-Fi controller (802.11 b/g/n/i) up to 150 Mbps Integrated Dual-mode Bluetooth 4.2 controller ("classic" and Bluetooth low energy (BLE) support) 12-bit SAR 12-channel ADC 8-bit, 2-channel DAC Capacitive touch sensor interface LED PWM controller CAN 2.0 controller Integrated temperature sensor Integrated Hall-effect sensor  Operating temperature range: -40 C to +125 C 4 MB on-board FLASH memory On-board 2.4 GHz PCB trace antenna for Wi-Fi/Bluetooth On-board FTDI FT231X USB-UART converter Operation from single Li-Poly battery with on-board charger and regulator 2x capacitive touch switches 3x WS2812B addressable RGB LEDs Arduino Uno compatible form-factor for addition of shields Includes: 1x Kalam32-DEV board 1x 1500 mAH/3.7V Li-Ion battery 1x microUSB cable Documentation: Schematic (PDF) Schematics and code (Github) Tons of ESP32 related information at ESP32.com ESP32 IC Datasheet (PDF) Espressif ESP-IDF framework  (Recommended) Complete user guide (coming soon)

Item specifics Item Description: - Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. - Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). - The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux) - Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers. - Mega Sensor Shield V1.0 pinout all of the Arduino digital and analog interface. - Support IIC interface. - Support 32 road Servo Motor Drive Shield interface. - Support bluetooth module communication interface. - Support SD card module communication interface. - Support APC220 wireless rf modules communication interface. - Support RB URF ultrasonic sensors interface. - Support LCD serial and parallel interface. - Support Kinds of interface and can be fully compatibled with Arduino Mega. - Size:10cm x 5.5cm What's