Module arm

1 Channel Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino This is a  1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).   Features: 1 -Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250 V AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size R elay status indicator LED (red) Weight ： 10 0 g   Module interface specifications (3 wire)   1. External 12V 2. GND external GND 3. 1N interchange relay control interface (Control by 3.3V or 5V Logic)   Package included:   1 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

Description SD Card Module Slot Socket Reader For Arduino ARM MCU. Brand new and high quality. This SD Card module can make your SD application more easier and simple. It is easily interfaced as a peripheral to your arduino sensor shield module. Through programming, you can read and write to the SD card using your arduino. Can be used for SD Card more eaisly, such as for MP3 Player, MCU/ARM system control. All SD SPI pins output, MOSI, SCK, MISO and CS. Support 5V/3.3V input Technical parameters: Item size:mm Net weight: 8g Packaging weight: 18g Color: Blue   Package Contents: 1 x NEW SD Card Module Slot Socket Reader for Arduino ARM MCU Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 10 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 1 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is V (5 V / ), and the input voltage of this module should be more than V x V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC V-25 V Voltage analog resolution: V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x 5 = 16.5 V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is 0.00489 V (5 V / 1023), and the input voltage of this module should be more than 0.00489 V x 5 = 0.02445 V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC0.02445 V-25 V Voltage analog resolution: 0.00489 V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

1 Piece HC-06 (Slave Mode only) Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU. HC-06 Module only supports slave mode. If you need Master & Slave mode check my other listing for HC-05 Bluetooth Module. Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details Description: Operating Voltage: 3.3 V Supports only Slave Mode Bluetooth V2.0 Protocol Support Package Include 1 Piece HC-06 Bluetooth (Slave Mode only) RF Transceiver Module for Arduino, AVR, ARM MCU About Us We are a small company based

1 Piece HC-06 (Slave Mode only) Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU. HC-06 Module only supports slave mode. If you need Master & Slave mode check my other listing for HC-05 Bluetooth Module. Order more than one piece to save shipping cost. You can contact us at +91 94625 64100 for any question or concern. Device Details Description: Operating Voltage: 3.3 V Supports only Slave Mode Bluetooth V2.0 Protocol Support Package Include 1 Piece HC-06 Bluetooth (Slave Mode only) RF Transceiver Module for Arduino, AVR, ARM MCU About Us We are a small company based

Product information Description: Brand new and high quality. SD Card module can make your SD application more easier and simple. It is easily interfaced as a peripheral to your arduino sensor shield module. Through programming, you can read and write to the SD card using your arduino. Can be used for SD Card more eaisly, such as for MP3 Player, MCU/ARM system control. All SD SPI pins output, MOSI, SCK, MISO and CS. Support 5V/3.3V input. Size:5.1cm x 3.1cm - 2.01inch x 1.22inch. Package: 1 pc x SD Card Module Reader

New AMSV Power Supply Module 3.3V Arduino PIC ARM DSP Product information Feature:     Input Voltage:4.5~7VDC     Output Voltage:3.3V     Output Current:800mA(Load Current can't be more than 800mA)     PCB Size:25mm*11mm     with Power LED (Red)     Weight:about1.6g Package Include:   1-pc AMSV Power Supply Module 3.3V power Supply Module Rs. 145 Shipping is all over India. Please Provide Complete Address and phone number. See Shipping description for details Shipment will be sent between 3.00 pm to 4.00 pm except Sundays/Public Holidays.  Tracking details will be provided within 12hours after shipment is booked. Most shipments will be sent through Speed Post/Registered Post

SD Card Shield is a simple solution for transferring data to and from a standard SD card. The pinout is directly compatible with Arduino, but can also be used with other micro-controllers. It allows you to add mass storage and data logging to your project. Brand new and high quality SD Card module can make your SD application more easier and simple It is easily interfaced as a peripheral to your Arduino sensor shield module Through programming, you can read and write to the SD card using your Arduino Can be used for SD Card more easily, such as for MP3 Player, MCU / ARM system control All SD SPI pins output, MOSI, SCK, MISO and CS Support 5V/3.3V input Package contents: 1 x  SD Card Module Slot Socket Reader

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc....   ***(Work with All Analog/Digital circuits with signal from 3V to 15V) *** Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 3.3v and 5v micro controller  (Check Other Listings  for  1.8V-5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 3V to 16V(1.5V to 16V for 1.8V logic) with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 3.3V and 5V micro controllers/Digital (1.8V Version also available Please Check My other Listings).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

I2C RTC DS AT24C32 Real Time Clock Module For AVR ARM PIC This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for datalogging, cl ock-building, time stamping, timers and alarms, etc. The DS is the most popular RTC, and works best with 5V-based chips such as the Arduino. Features: Brand new and high quality. This is the DS Real Time Clock developed by one of our designer. The module comes fully assembled and pre-programmed. The DS is accessed via the I2C protocol. Two wire I2C interface. Hour:Minutes: Seconds AM/PM. Day Month, Date – Year. DS based RTC with LIR battery (Battery include). 1Hz output pin. 56 Bytes of Non-volatile memory available to user. Item size: mm Net weight: 7g Note: The DS is simple and inexpensive but not a high precision device. It may lose or gain up to 2 seconds or more a day. For a high-precision, temperature compensated alternative. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

5V 4--Channel Relay Module for Arduino PIC ARM DSP AVR Electronic NEW Product Description 1. module with pine le relay control, ac voltage maximum 250 V, ac current maximum 10 A, dc voltage maximum 30 V, dc current maximum 10 A;  2. the transistor drive, drive ability;  3. working voltage 5 V  4. has the fixed bolt hole and easy installation  5. small board PCB size: 7.2 cm * 4.8 cm  6. weight ：60 g Package included: 1 PCS Rs. 410 Shipping is all over India. Please Provide Complete Address and phone number. See Shipping description for details Shipment will be sent between 3.00 pm to 4.00 pm except Sundays/Public Holidays.  Tracking details will be provided within 12hours after shipment is booked. Most shipments will be sent through Speed Post/Registered Post

ACSA hall current sensor module for arduino ARM, AVR, PIC and other MCU With on board power indicator Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description:   The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.  ·         The current sensor chips: ACS712ELC-30B; ·         Pin 5V power supply, on-board power indicator; ·         The module can measure plus or minus 30 amps, corresponding to the analog output of 185 mV / A; ·         If there is no the detection current through, the output voltage is VCC / 2 ·         PCB board size: 31 (mm) x13 (mm); ·         Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!   Package Include:   ·         1 x     ACSA current sensor   Shipping Details:   Our preferred shipping partners are Indian speed post   Feedback: ·         In case you find any problem

ACSA hall current sensor module for arduino ARM, AVR, PIC and other MCU With on board power indicator   Product Description:   The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.  ·         The current sensor chips: ACS712ELC-30B; ·         Pin 5V power supply, on-board power indicator; ·         The module can measure plus or minus 30 amps, corresponding to the analog output of 185 mV / A; ·         If there is no the detection current through, the output voltage is VCC / 2 ·         PCB board size: 31 (mm) x13 (mm); ·         Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!   Package Include:   ·         1 x     ACSA current sensor   Shipping Details:   Our preferred shipping partners are Indian speed post   Feedback: ·         In case you find any problem

1 Piece HC-05 Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details Description: Operating Voltage: 3.3 V Supports Master & Slave Mode Bluetooth V2.0 Protocol Support Package Include 1 Piece HC-05 Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU About Us We are a small company based

Package Includes: 1 Piece new  Voice Recognition Module  Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

1 Piece HC-05 Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU Order more than one piece to save shipping cost. You can contact us at +91 94625 64100 for any question or concern. Device Details Description: Operating Voltage: 3.3 V Supports Master & Slave Mode Bluetooth V2.0 Protocol Support Package Include 1 Piece HC-05 Bluetooth RF Transceiver Module for Arduino, AVR, ARM MCU About Us We are a small company based

  Package Includes: 1 Piece new  Voice Recognition Module  Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

1 x ACS712 30A AC / DC  CURRENT SENSING MODULE ARDUINO, ARM and other MCU *** MUST HAVE FOR STUDENTS  AND HOBBYIST ***  This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems. The ACS712 current sensor measures up to 30A of DC or AC current. Product description: Current sensor chips: ACS712ELC-30A Pin 5V power supply, on-board power indicator Can measure the positive and negative 30 amps, corresponding to the analog output 66mV / A No test current through the output voltage is VCC / 2 PCB board size: 31 (mm) x13 (mm) Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact! You Will Get: ACS712ELC-30A module  = 1 pcs Shipment Details: We ship the item anywhere

iWave’s new SODIMM module encompasses NXP i.MX6ULL ARM Cortex A7 CPU core operating up to 528MHz speed with Linux OS. The new i.MX6ULL SODIMM SOM module is designed to meet the needs of many general embedded applications that require power efficient, high performance and cost optimized solution. The NXP i.MX6ULL applications processor includes an integrated power management module which helps in reducing the complexity of an external power supply and simplifying power sequencing. The module is equipped with NXP/Freescale PF3001 PMIC (Power Management IC) that helps to achieve power optimization. This cost effective i.MX6ULL board is ultra-compact in size with the form factor of 67.6mm X 29mm. The i.MX6ULL system on module is integrated with on-board PMIC, Flash, DDR3 and dual Ethernet PHY. The i.MX6ULL SOM module is ideally suitable for the cost & power optimized general embedded and industrial applications. The major target applications of this i.MX6ULL module are Industrial HMI & Access Control, Mobile POS, Secure e-commerce, Energy Management, IOT gateway, Industrial control & automation, Medical & Healthcare equipment, White goods and Smart appliances.

Description Package Includes: 1 Piece new  5V 2 Two Channel Relay Module With optocoupler for Arduino PIC ARM DSP AVR It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The ACS712 Current Sensor Module is an analog input that provides accurate measurement of AC and DC currents. Current sensors are used to monitor the amount of power a circuit consuming. This current sensor module can handle AC or DC currents up to 5A. A single analog output signal connects to your microcontroller to provide the sensor readings. This module operates at 5V. Highly relaible fully compatible Easy to use Connect a 5V power supply to the Voltage (V) and common Ground (G) pins. Connect the analog Signal (S) output pin to an analog input on your microcontroller. Connect the circuit to be measured to the screw terminals. The analog output signal will be proportional to the amount of current passing through the screw terminals. Technical parameters: pin 5V power supply, on-board power indicator there is no the detection current through, the output voltage is VCC / 2 the PCB board size: 27.4 (mm) x11.8 (mm)   Package Includes: 1 Piece new  AC / DC 5A Current Sensing Module ACS 712 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new 12V  Two Channel Relay Module With optocoupler for Arduino PIC ARM DSP AVR It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The ACS712 Current Sensor Module is an analog input that provides accurate measurement of AC and DC currents. Current sensors are used to monitor the amount of power a circuit consuming. This current sensor module can handle AC or DC currents up to 5A. A single analog output signal connects to your microcontroller to provide the sensor readings. This module operates at 5V. Highly relaible fully compatible Easy to use Connect a 5V power supply to the Voltage (V) and common Ground (G) pins. Connect the analog Signal (S) output pin to an analog input on your microcontroller. Connect the circuit to be measured to the screw terminals. The analog output signal will be proportional to the amount of current passing through the screw terminals. Technical parameters: pin 5V power supply, on-board power indicator there is no the detection current through, the output voltage is VCC / 2 the PCB board size: 27.4 (mm) x11.8 (mm)   Package Includes: 1 Piece new  AC / DC 5A Current Sensing Module ACS 712 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new 12V  Two Channel Relay Module With optocoupler for Arduino PIC ARM DSP AVR It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

AMSV Power Supply Module 3.3V power Supply Module Product information Feature:     Input Voltage:4.5~7VDC     Output Voltage:3.3V     Output Current:800mA(Load Current can't be more than 800mA)     PCB Size:25mm*11mm     with Power LED (Red)     Weight:about1.6g Package Include:   1-pc AMSV Power Supply Module 3.3V power Supply Module

Description Voice record module is base on ISD, which a multiple-message record/playback device. It can offer true single-chip voice recording, no-volatile storage, and playback capability for 8 to 20 seconds. The sample is 3.2k and the total 20s for the Recorder. Operating mode selector switch LED indicates if the board is recording Record up to 64 seconds of audio All pins of the ISD broken out to 0.1" headers Breadboard friendly This module use is very easy which you could direct control by push button on board or by Microcontroller such as Arduino, STM32, Chip Kit etc. From these, you can easy control record, playback and repeat and so on. Technical parameters: 2.4V to 5VDC supply voltage On-chip 8O speaker driver Record up to 20 seconds of audio Dimensions: 37 x 54 mm   Package Includes: 1 Piece new  Voice Recording Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  MAX485 Module / RS- 485 Module / TTL to RS- 485 Converter Module For Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order