Pcs wireless rf

Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module Descriptions: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm Technical Parameters: Input Voltage: 1.9 ~ 3.6V Size: 34mm X 17mm X 1mm     Package Included: 1 x Arduino NRF24L01+ 2.4GHz Wireless Transceiver Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band.  Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller.    Features Worldwide license-free 2.4GHz ISM band operation 250kbps, 1Mbps and 2Mbps on-air data-rate options Enhanced ShockBurst™ hardware protocol accelerator Ultra low power consumption – months to years of battery lifetime   Specifications Power supply: V IO port working voltage:  0~3.3v / 5v Transmitting rate: +7dB Receiving sensitivity: ≤ -90dB Transmission range: 250m

Cheapest Wireless Solution for upto 100 Meter* With Inbuilt antenna. When Tx rate is Set 250 Kbps, Range is Really Good. Good for Home Wireless Automation Projects. If you are looking for Long Range ( Meter) NRF Module Click   HERE We have Ready Library to use with AVR / PIC Microcontroller. After you Purchase Please let us know via Message. ****Note**** NRF24L01+ Module Works on 3.3V. So you will require 3.3V Regulator circuit. If you don't want to waste your time. Do Consider Buying  NRF24L01+ Socket   from us. Which includes everything you want to start with your NRF24L01+ RF Communication. Features: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm. Powered by Turbo Lister

Measy   2.4Ghz wireless air mouse + touchpad keyboard can accomplish functions of traditional keyboard and mouse. With the cordless air mouse + keyboard you can quickly and precisely move the cursor and type directly on the screen, and control your PC, smart TV or  Android TV box. Main Features: - High sensitivity touchpad keyboard + air mouse - 2.4GHz intelligent connection, plug and play - Real QWERTY full function mini keyboard with more defined buttons - Touchpad functional handheld keyboard - Auto sleep mode: Automatically into sleep mode 2 minutes left without operation - Convenient and efficient for conference, presentation and lecturing - To enjoy PC multi-media entertainment at home - To share large TV and projector screen - Large PAD for handwriting   Powered by Turbo Lister

This is a listing for 1 Way Remote  Control Switch (Works 50 To 100 MTS) ON/OFF One Lamps/Fan or Any Other Loads  - 220 V, Watt /4 Amp Load Product Description: 100% Brand New Excellent Quality Voltage:220v/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way:Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery One Way Control:Remote Control, Manuel Control, Head Control. Radio Frequency, Anti-Interference, No Barrier Not Obstructed By Walls, Capable of Connecting Any Load Applicable To All The Common Lamps Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility Digital Telecontrol Switch 1-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote Control, Replace Original Wall Switch Directly Compact Size  Light Weight. Shell Material: Metal Case / Aluminum Base Color: Sliver Weight:  250g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Water Pump, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a Power Backup (Inverter) at Your Home Because if Power Fail/Cut and Return/Come Back Again Then This Unit Automatically Any One or All Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Applications: Suitable For Home, Office, Hotel, Factory, Hospital, etc Package Include: 1x Receiver (Stainless steel shell) 1x Transmitter (Remote) 1x Battery (12V 23A)

This is a listing for 5 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 5 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way: Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery 5 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently, All The Ways Can Turn On/Off Completely Radio Frequency, Anti-Interference, No Barrier Radio Frequency, all-way control, not blocked by any Obstacles Applicable To All The Common Lamps & Fans Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility 4-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote Controller Powered by 1 x 23A / 12V Battery (included) Color: White Plastic housing material Weight:  240g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Our Product Come With 1 Month Against any Manufacturer Warranty. Applications: Suitable For Home, Office, Factory, Restaurants, Hotels, Meeting Rooms, Museum, Hospital, Shop Windows, and Art Gallery etc Package Include: 1 x Receiver 1 x Transmitter (Remote) 1 x Battery (12V 23A) 

This is a listing for 4 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 4 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way:Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery 4 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently, All The Ways Can Turn On/Off Completely Radio Frequency, Anti-Interference, No Barrier Radio Frequency, all-way control, not blocked by any Obstacles Applicable To All The Common Lamps & Fans Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility 4-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote controller powered by 1 x 23A / 12V battery (included) Color: White Plastic housing material Weight:  240g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Our Product Come With 1 Month Against any Manufacturer Warranty. Applications: Suitable For Home, Office, Factory, Restaurants, Hotels, Meeting Rooms, Museum, Hospital, Shop Windows, and Art Gallery etc Package Include: 1 x Receiver 1 x Transmitter (Remote) 1 x Battery (12V 23A) 

This is a listing for 3 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 3 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption Working Temperature ≤-25°C~+80°C Working Humidity ≤90%RH Electric Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm Load For Each Way: Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m Battery Can Removable And Changeable.When The Indicator Light Darken,Should Change The Battery 3 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently, All The Ways Can Turn On/Off Completely Radio Frequency, Anti-Interference, No Barrier Radio Frequency, all-way control, not blocked by any Obstacles Applicable To All The Common Lamps & Fans Fast, Easy Installation, Turn Off The Power Before Installing Remote Controller And Switch Can Be Used Simultaneously For Ease And Flexibility 3-Way Digital Telecontrol Switch, Wireless Remote Control Switch, Remote Controller Remote Controller Powered by 1 x 23A / 12V Battery (included) Color: White Plastic housing material Weight:  240g IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself  (Person Who Don't Have Knowledge Of Electricity Please Don't Buy This, Only  Buy If You Can Arrange An Electrician To Fit The Same) Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE Our Product Come With 1 Month Against any Manufacturer Warranty. Applications: Suitable For Home, Office, Factory, Restaurants, Hotels, Meeting Rooms, Museum, Hospital, Shop Windows, and Art Gallery etc Package Include: 1 x Receiver 1 x Transmitter (Remote) 1 x Battery (12V 23A) 

4 Way Remote  Control Switch Switch ON/OFF 4 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product  Description:  Voltage:220v-250V/HZ Standby Power Consumption Incandescent Lamp ≤W Receive Sensitivity ≥-105Dbm  Load For Each Way:Electric Incandescent Lamp ≤w,Energy Saving Lamp ≤500w, Daylight Lamp ≤500w Remote Control Distance Range ≤80m  4 Way Control:Remote Control, Manuel Control, Head Control. Each Way Can Turn On/Off Independently,   Operates on Radio Frequency,  not blocked by any Obstacles  IN-DOOR USE ONLY! Please Do Not Use Inductive Loads Like AC, Motor, Etc Connection Is  Mentioned  On The  Unit  Itself Only  Buy If You Can Arrange An Electrician To Fit The Same  Note: You Should a  Power Backup (Inverter) at Your Home Because if Power Fail/Cut and  Return/Come Back Again Then This Unit Automatically Any One or All  Switches are Become Switch ON. PLEASE NOTE THAT DESIGN AND COLOR MAY CHANGE FROM THE PICTURE SHOWN ABOVE

This is a listing for 4 Way Remote  Control Switch (WORKS 50 To 100 MTS) ON/OFF 4 Lamps/Fan or Any Other Loads  - 220 V, Watt /5 Amp Load Product Description: 100% Brand New & Excellent Quality Voltage:220v-250V/HZ Standby Power Consumption

Dear Buyer,   We maintain high standards of excellence and strive for 100% customer satisfaction. Positive feedback is very important to us, simply leaving negative or   neutral feedback can't solve the problem. If you have any questions, please contact us first, so that we can satisfactorily address your concerns.   Thank You   ########################### Product Description Starts ###########################   Features Suitable for incandescent and energy-saving lights. High quality and low price Fast response and long control distance. Stable performance and strong to resist interference, not obstructed by walls! Easy  to install and simple to use. Specification Operating Temperature: Brand Name: Hesunse Max. Voltage: AC 250V Input Power: AC180V~250V(HZ) Max Load Power(per way): W(incandescent) 300W(LED light) Material: ABS plastics(remote controller) Powdering iron(receiver) Control Distance: 20M

Description:   The scope of application can be used for incandescent lamps, energy saving lamps, fluorescent ring light tubes, fluorescent tubes, the combination of chandeliers, decorative lights, LED lights with, LED lights, electric fans, televisions, computers, electrical and other household appliances Feature: 1.One 23A 12V battery (Not included)  put inside of remote; 2.This is fixed wall 4 channels light ON/ OFF switch with remote control 3.Remote control range is up to 50 meters, not obstructed by walls 4.Nice to control your light,your device

RF Controlled Wireless Robot using Microcontroller DIY(DoItYourself) PROJECT Kit Motor control through RF communication is a very interesting application and is widely used

Wireless Bluetooth RF Transceiver Module RS232 TTL (HC-06) bluetooth module better then HC-05 Allows your device to both send or receive the TTL data via Bluetooth technology wirelessly without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

Wireless Remote Controller RF Dimmer for Single LED Color Light Strips Hook up this LED light dimmer and you will be able to adjust the lighting level wirelessly with the included remote control. This is the perfect item to set the mood