Pcs wireless rf transceiver

Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module Descriptions: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm Technical Parameters: Input Voltage: 1.9 ~ 3.6V Size: 34mm X 17mm X 1mm     Package Included: 1 x Arduino NRF24L01+ 2.4GHz Wireless Transceiver Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band.  Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller.    Features Worldwide license-free 2.4GHz ISM band operation 250kbps, 1Mbps and 2Mbps on-air data-rate options Enhanced ShockBurst™ hardware protocol accelerator Ultra low power consumption – months to years of battery lifetime   Specifications Power supply: V IO port working voltage:  0~3.3v / 5v Transmitting rate: +7dB Receiving sensitivity: ≤ -90dB Transmission range: 250m

Cheapest Wireless Solution for upto 100 Meter* With Inbuilt antenna. When Tx rate is Set 250 Kbps, Range is Really Good. Good for Home Wireless Automation Projects. If you are looking for Long Range ( Meter) NRF Module Click   HERE We have Ready Library to use with AVR / PIC Microcontroller. After you Purchase Please let us know via Message. ****Note**** NRF24L01+ Module Works on 3.3V. So you will require 3.3V Regulator circuit. If you don't want to waste your time. Do Consider Buying  NRF24L01+ Socket   from us. Which includes everything you want to start with your NRF24L01+ RF Communication. Features: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm. Powered by Turbo Lister

Wireless Bluetooth RF Transceiver Module RS232 TTL (HC-06) bluetooth module better then HC-05 Allows your device to both send or receive the TTL data via Bluetooth technology wirelessly without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

WELCOME TO ROBOCENTRAL *** HC-06 Bluetooth RF Transceiver Module *** !!   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ***DESCRIPTION*** This is a bluetooth module for use with any microcontroller.  It uses the UART protocol to make it easy to send and receive data wirelessly.  The HC-06 module is a slave only device.  This means that it can connect to most phones and computers with bluetooth.   !!!  SPECIFICATIONS  !!! A breakout board for easier connectivity Designed for 3.3v level ttl but will accept 5v level as well Built

Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

HC05 Bluetooth Module Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

Product features: Using HC - 06 from module 1, a core module, which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid 2, the led indicates a bluetooth connection status, twinkle said there was no bluetooth connectivity, Chang Liang said bluetooth is connected and turned on the port 3, backplane "3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage! 4, interface level 3.3 V, can be connected directly to all kinds of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.), 5 V single chip can be connected directly, without MAX232 couldn/'t through MAX, clearing the effective distance of 10 meters, more than 10 meters is possible, but not to this distance connection quality After 6, pairing when full duplex serial port to use, do not need to know any bluetooth protocol, but supports only one

It's HC-06 bluetooth module it acts only as slave. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment. Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 10 x Interface Base Board Module For Further Details: Email:

Support Master and Slave mode, modify by AT commander  Product Description: The Bluetooth UART RS232 serial Converter Module can easily transfer the UART data through the wireless Bluetooth,without complex PCB layout or deep knowledge

Product Description: The Bluetooth UART RS232 serial Converter Module can easily transfer the UART data through the wireless Bluetooth,without complex PCB layout or deep knowledge

DESCRIPTION 15 MHz ASK Transceiver Module Transmitter: The 315 MHz transmitter will work with the RF Links at 315 MHz at either baud rate. Only one 315 MHz transmitter will work within the same location. This is an ASK transmitter module with an output of up to 8mW depending on power supply voltage. The transmitter is based on SAW resonator and accepts digital inputs, can operate from 2 to 12 Volts-DC, and makes building RF enabled products very easy. Receiver: This receiver type is good for data rates up to bps and will only work with the 315 MHz transmitter. Multiple 315MHz receivers can listen to one 315 MHz transmitter. This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, even current program register values wirelessly to the receiver. These modules have up to 500 ft range in open space. The receiver is operated at 5V. We have used these modules extensively and have been very impressed with their ease of use and direct interface to an MCU. The theory of operation is very simple. What the transmitter 'sees' on its data pin is what the receiver outputs on its data pin. If you can configure the UART module on a controller, you have an instant wireless data connection. The typical range is 500ft for open area. This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, and even current program register values wirelessly to the receiver. These modules have up to 500 ft range in open space. The transmitter operates from 2-12V. The higher the Voltage, the greater the range - see range test data in the documents section. Specifications RF Transmitter Features Frequency Range: 315 MHZ. Supply Voltage: 3~12V Output Power: 4~16dBm Circuit Shape: Saw RF Receiver Features Receiver Frequency: 315 MHZ Typical sensitivity: -105dBm Supply Current: 3.5mA Frequency: 1MHz Low power consumption Operation voltage: 5 Volts We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

The aim of this project is to develop a system for wireless message communication between two computers using 2.4 GHz trans-receiver units. In offices, communication between employees is essential. This project uses a pair of 2.4 GHz transceiver modules duly powered by 5 volt DC and alarm circuits. They are used for bidirectional real time chat communication from one PC to another wirelessly using hyper terminal. While one of the user attempts to initiate a chat, intimation upon that message is received first by a buzzer sound. There after the other user can start communicating over the chat mode from his PC. A pair of transceiver modules are connected to the PCs using a DB9 (De-Sub) connector and through serial data cord using RS232 protocol communication between the module and the PC. An on-board dedicated ac to dc power supply is used at both ends to power the units. This concept

NRF24L01+PA+LNA 1.1KM Range Module for Serious Long Range Wireless Projects This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost and Of course long range upto meters !! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to meters! (No barrier)   Specifications: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception (Multiceiver) ****Note**** NRF24L01+ Module Works on 3.3V. So you will require 3.3V Regulator circuit. If you don't want to waste your time. Do Consider Buying  NRF24L01+ Socket. Which includes everything you want to start with your NRF24L01+ RF Communication. Package Contains: 1 x NRF24L01+PA+LNA 1 x Long Range SMA connector Antenna For Any Technical Clarification. Please Click on Ask Seller ? We are Here to Help you. Any Questions Answered