Tx input

before buying please call me for better service 5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

BRAND NEW, READY STOCK TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) AT AN UNBELIEVABLE PRICE! OFFER VALID TILL STOCK LASTS! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) AT AN UNBELIEVABLE PRICE! OFFER VALID TILL STOCK LASTS! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH GOOD SIGNAL RANGE! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

FAMOUS BRAND "TURNIGY" TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH GOOD SIGNAL RANGE (approx. 0.7 to 1 km on line of sight with full battery)! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

Brand new, original TURNIGY 2.4Ghz 6 Channel transmitter and receiver of long signal radius range (on line of sight with full battery) Ready stock! Buy with confidence! DESCRIPTION FROM MANUFACTURER: The Turnigy 6X is a great 2.4ghz Transmitter and receiver that uses solid and reliable FHSS spread spectrum technology. The Turnigy 6X has both a nice quality look and feel, especially given it's low price, features include Retract & Flap switches, servo reversing, trims, charging port and Delta Mixing. Turnigy 6X Transmitter Specs: Resolution: Frequency: 2.4ghz ISM Frequency Range Modulation: GFSK Spread Spectrum Mode: FHSS Number of Frequency Channels: 20 Hopping Rate: 125 jump/s Output Power: Working Current: Working Voltage: 1.2v x 4 (AA/Nimh) Dimensions: 200mm x 185mm x 105mm Turnigy XR700 Receiver Specs: Channel: 7 (inc RX Battery Input) Frequency: 2.4g ISM Frequency Range Power: 4.5v ~ 9.6v/ Net Weight: 11.5g Dimensions: 41mm x 28mm x 14mm Requires: 4 x AA Type Battery For Operation We also provide 1 piece of connector band worth rs. 299 free as shown

Package Include: 2X  ATMEGA328P 5V/16M.     Product  description: Mini Pro is a micro-controller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), Eight analog inputs, a 16MHz resonator, a reset button, mounting hole pin head. Technical parameters: 14 Digital input / output ports RX, TX D2-D13 of,    8 analog input port A0 to A7  The TTL level serial transceiver port RX / TX  6 PWM ports, D3,, D5, D6, D9, D10, D11  Using Atmel Atmega328P-AU micro controller   Supports serial download  Support for external 3.3V ~ 12V DC power supply  Support 9V battery-powered clock frequency 16MHz  Dimensions: (mm)

Package Include: 1X  ATMEGA328P 5V/16M.     Product  description: Mini Pro is a micro-controller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), Eight analog inputs, a 16MHz resonator, a reset button, mounting hole pin head. Technical parameters: 14 Digital input / output ports RX, TX D2-D13 of,    8 analog input port A0 to A7  The TTL level serial transceiver port RX / TX  6 PWM ports, D3,, D5, D6, D9, D10, D11  Using Atmel Atmega328P-AU micro controller   Supports serial download  Support for external 3.3V ~ 12V DC power supply  Support 9V battery-powered clock frequency 16MHz  Dimensions: (mm)