Tx 78229 4

The Hubsan 4-Channel 2.4GHz Transmitter (TX) is compatible with the X4 H107C palm-sized quadcopter. It is for BNF (Bind-n-Fly) versions of the X4 H107C that is versions that do not include a transmitter or can serve as a replacement should the original get lost or damaged.The transmitter supports Mode 1 and Mode 2 stick configurations. Mode 2 is the more commonly used

One year old, in great condition, pedals have recently been cleaned and greased. This product contains 1. Thrustmaster tx servo base 2. thrustmaster 28TM leather wheel 3. Thrustmaster T3PA pedal set 4. Thrustmaster T pedal stand

BRAND NEW IC Wireless 4 -Channel RF Remote control Transmitter & Receiver Key Kits / Tx - Rx Modules                                                                   Remote control: 1.Operating voltage: DC12V (27A/12V battery x1) 2.Operating Current: 10mA @ 12V 3.Radiated power: 10mw @ 12V 4.Modulation mode: ASK (Amplitude Modulation) 5.Transmitting frequency: 315MHZ (SAW frequency stabilization) 6.Transmission distance:M (Open field the receiver sensitivity -100dbm) 7.Encoder types: fixed code 8. The frequency of this product is 315 mhz. With decoding receiver board 1.The operating voltage DC5V, receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 2.Size: mm There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Module function description: This module has no self-locking function, simple implementation, wireless remote control by pressing a key, The receiver outputs a high level when the corresponding key is pressed. When key is released, the output goes to normal, and each channel is independent of each other. The output of high level can directly drive the relay. VT foot is receiving signal terminal. There is no detailed information. Package Contents: 1 x 4 channel Remote control 1 x 4 channel Receiver Shipping through BlueDart/Aramex/FedEx                          

BRAND NEW, READY STOCK TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) AT AN UNBELIEVABLE PRICE! OFFER VALID TILL STOCK LASTS! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) AT AN UNBELIEVABLE PRICE! OFFER VALID TILL STOCK LASTS! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH GOOD SIGNAL RANGE! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

FAMOUS BRAND "TURNIGY" TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH GOOD SIGNAL RANGE (approx. 0.7 to 1 km on line of sight with full battery)! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

Brand new, original TURNIGY 2.4Ghz 6 Channel transmitter and receiver of long signal radius range (on line of sight with full battery) Ready stock! Buy with confidence! DESCRIPTION FROM MANUFACTURER: The Turnigy 6X is a great 2.4ghz Transmitter and receiver that uses solid and reliable FHSS spread spectrum technology. The Turnigy 6X has both a nice quality look and feel, especially given it's low price, features include Retract & Flap switches, servo reversing, trims, charging port and Delta Mixing. Turnigy 6X Transmitter Specs: Resolution: Frequency: 2.4ghz ISM Frequency Range Modulation: GFSK Spread Spectrum Mode: FHSS Number of Frequency Channels: 20 Hopping Rate: 125 jump/s Output Power: Working Current: Working Voltage: 1.2v x 4 (AA/Nimh) Dimensions: 200mm x 185mm x 105mm Turnigy XR700 Receiver Specs: Channel: 7 (inc RX Battery Input) Frequency: 2.4g ISM Frequency Range Power: 4.5v ~ 9.6v/ Net Weight: 11.5g Dimensions: 41mm x 28mm x 14mm Requires: 4 x AA Type Battery For Operation We also provide 1 piece of connector band worth rs. 299 free as shown

This is the Spektrum replacement transmitter for RTF aircraft. The mode is changed from 2 to 4 with a switch on the transmitter. The modes operate as follows: Mode IIThe control stick configuration with the ailerons and elevator being controlled by the right stick while the left stick controls the rudder and throttle.Mode IVThe control stick configuration with the rudder and elevator being controlled by the right stick while the left stick controls the aileron and throttle.