Voltage display module dc

OLED 0.96" yellow blue Display Module For Arduino I2C Display 128X64 OLED What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Capable of wide viewing angles?~180?? 6. Low operating voltage and power consumption 7. Quick response (~ ? second level) 8. Wide range of operating temperatures (-40c to 85c) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size:  27.3MM *27.8MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306       Package Included: 1PCS * New  yellow-blue 0.96" I2C IIC SPI Serial 128X64 OLED LCD LED Display Module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Blue 0.96" inch SPI 128 x 64 OLED display module with CS pin SSD   Fully working Software Code included with English Font.     Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with arduino, AVR, PIC, 51 series, MSP,STM,CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:    128 x 64 Module Size:27.0mm x 27.0mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include: ·       1 x   0.96” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Blue 1.3" inch SPI 128 x 64 OLED display module with CS pin   Fully working Software Code included with English Font   Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with Arduino, AVR, PIC, 51 series, MSP, STM, CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:128 x 64 Module Size:35.5mm x 33.5mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include:   ·       1 x   1.3” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Yellow + Blue 0.96" SPI Serial 128x64 OLED LCD Display Module 3-5V SSD   Fully functioning Software Code(AVR) included with English Font.        Product Summary: OLED SPI Operating Voltage 3-5V Input Voltage (recommended) 5V Input Voltage (limits) 3-5V No. of Pins 6 Power Pins 2(VCC,GND) LED colour Yellow and Blue |||||| & |||||| Resolution 128 x 64 View angle >160 Power consumption 0.08w at full screen lit Working temperature -30C ~ 70C Control Chip SSD Module size(Approx.) mmx27.1mmx4.1mm Module weight 0.06kg (lb.)

White 0.96" SPI Serial 128x64 OLED LCD Display Module 3-5V SSD   Fully functioning Software Code(AVR) included with English Font.        Product Summary: OLED SPI Operating Voltage 3-5V Input Voltage (recommended) 5V Input Voltage (limits) 3-5V No. of Pins 6 Power Pins 2(VCC,GND) LED colour White Resolution 128 x 64 View angle >160 Power consumption 0.08w at full screen lit Working temperature -30C ~ 70C Control Chip SSD Module size(Approx.) mmx27.1mmx4.1mm Module weight 0.06kg (lb.)

5A 75W XL DC-DC Converter Adjustable Step-Down Module V to 1.25V-36V DIY Adjustable Power Supply The DC-DC Adjustable Step Down Converter Module has large power, high efficiency, low-ripple. With power indicator, on-board voltmeter. The voltmeter can calibrate automatically. The measure can be changed between input and output voltage, with indicator. The voltmeter can also be shutdown. The board uses connection terminal for easy wiring. Features: Module Properties: 5A High Power 75W DC-DC adjustable step-down module Input voltage: DC V Output voltage: DC 1.25V ~ 36V continuously adjustable (the input voltage must be higher than the output voltage 1.5V) Output current: max 5A, recommended for use

LM Voltage Display Module DC-DC Buck Converter Step-Down Power Module   This is an LM DC-DC buck converter step-down power module with high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Iteaduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater than 10W), please add a heat sink on it. Features  Adjustable Output Version Adjustable Version Output Voltage Range, 1.2V to 37V ±4% Max Over Line and Load Conditions Available

Technical Specs Operating Voltage -         VDC Typical Voltage   - 5V Operating Current   - 320mA Max Operating Current   - 2A LED Color   - Red Operating Temperature   -       0 to 50C Dimensions   -       52x34mm Input and output interface,  support for multiple module cascade as

Interface: SPI   GND: Power Gound VCC: 2.2V-5.5V SCL: CLK clock (High level 2.2V-5.5V) SDA: MOSI data (High level 2.2V-5.5V) RST: MOSI data (High level 2.2V-5.5V) D/C: Data/Command (High level 2.2V-5.5V)   Feature:   Color: Blue Resolution: 128x64 Power: 0.06W Wide power supply range: DC 3V-5V Temperature: -30°C to 70°C Dimension: x 27.1 mm (LW) Compatible with 3.3V and 5V control chip I / O level OLED internal drive chip: SSD136   Package included:   1 x White SPI OLED display

Package Contents Adjustable DC-DC converter power supply module upgrades LM voltage regulator module with voltage meter display Feature: 100% Brand new and high quality Input voltage range: 4-40 v (40 v to limit the highest voltage). Output voltage range:1.25V -37V (decompression mode, input output must be greater than 2 V above). Output current: 2 A continuous output. Output power: the maximum 15 w. Ripple frequency: 150 KHZ. Grain wave peak: 100 mv. Voltmeter precision: ± 5 ‰. Tatic power: 20 ma (and input voltage output voltage and digital tube color is closely related to the actual current will exist deviation). With voltage display function, the displayed accuracy is ± 0.05V, range is 0 - 40V.(Note:

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is V (5 V / ), and the input voltage of this module should be more than V x V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC V-25 V Voltage analog resolution: V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Order more than one piece to save shipping cost. You can contact us at +91 for any question or concern. Kit Details Features： Input voltage range: 4v to 40 v (40 v to limit the highest voltage).  Output voltage range: 1.25V - 37V (decompression mode, input output must be greater than 2 V above). Output current: 2 A continuous output. Output power: the maximum 15 w. Ripple frequency: 150 KHZ. Grain wave peak: 100 mv. Voltmeter precision: ± 5 ‰. Static power: 20 ma (and input voltage output voltage and digital tube color is closely related to the actual current will exist deviation).  Weight: 33g.  Size: 7cm*4cm. With voltage display function, the displayed accuracy is ± 0.05V, range is 0 - 40V.(Note:

Description It is 2.3 inch 8x8 RGB(Full-color) Dot Matrix LED Display 1. Common anode row LED matrix, and common cathode row one is available 2. 32 DIPs LED matrix display module It has reflector black,white or grey face is available; Technical parameters: 1. LED matrix module size: 60.6x60.6mm 2. LED round dot diameter: 5mm 3. Dot matrix module pitch(dot-to-dot distance): 7.62mm   Package Includes: 1 Piece new  DC-DC V To V 150W Power Supply Boost Adjust Module It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description It is 2.3 inch 8x8 RGB(Full-color) Dot Matrix LED Display 1. Common anode row LED matrix, and common cathode row one is available 2. 32 DIPs LED matrix display module It has reflector black,white or grey face is available; Technical parameters: 1. LED matrix module size: 60.6x60.6mm 2. LED round dot diameter: 5mm 3. Dot matrix module pitch(dot-to-dot distance): 7.62mm   Package Includes: 1 Piece new  DC-DC 10-32V To 12-35V 150W Power Supply Boost Adjust Module It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

DC DC Converter Step Up Boost Module 3V To 5V 1A (mA) USB Charger Module Can charge USB devices rapidly using High Power switching upto mA @ 5V output Features： Module Properties: non-isolated step-up module (BOOST) input voltage: V Output voltage: 5V Output Current: the maximum mA Efficiency: Up to 92% (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating Temperature: Industrial (-40°c to +85°c) Voltage regulation: ± 2.5% Size:mm(L*W*H) Specification: Module uses switching chopper booster chip, high efficiency (maximum 92%), and at the same time heat dissipation is small, and chip has its own over-current protection function. Under-voltage protection function, if less than 2.5 V,it drives itself into under-voltage protection condition (good battery protection, avoids excessive discharge and damage). 5W Output Power(MAX). This module USES a TDK laminated ceramic capacitor as the main filtering capacity, can make the output ripple low to 20 mv (5 v1a output cases) Standard USB interface, can be used for USB charging of mobile phones, MP3, MP4 and other equipment. Package Contents: 1 x DC boost USB module Shipping through DTDC/Trackon/OnDot/Madhur/Speedpost                                 For more information on our products and shipping please email us at     Please note that  All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items.  These are imported electronic items and can  easily  get damaged by mishandling or wrong connections.  Please Buy only if you can understand the product and its working well.  All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us