Yellow blue display module

OLED 0.96" yellow blue Display Module For Arduino I2C Display 128X64 OLED What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Capable of wide viewing angles?~180?? 6. Low operating voltage and power consumption 7. Quick response (~ ? second level) 8. Wide range of operating temperatures (-40c to 85c) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size:  27.3MM *27.8MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306       Package Included: 1PCS * New  yellow-blue 0.96" I2C IIC SPI Serial 128X64 OLED LCD LED Display Module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Blue 0.96" inch SPI 128 x 64 OLED display module with CS pin SSD   Fully working Software Code included with English Font.     Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with arduino, AVR, PIC, 51 series, MSP,STM,CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:    128 x 64 Module Size:27.0mm x 27.0mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include: ·       1 x   0.96” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Blue 1.3" inch SPI 128 x 64 OLED display module with CS pin   Fully working Software Code included with English Font   Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with Arduino, AVR, PIC, 51 series, MSP, STM, CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:128 x 64 Module Size:35.5mm x 33.5mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include:   ·       1 x   1.3” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Yellow + Blue 0.96" SPI Serial 128x64 OLED LCD Display Module 3-5V SSD   Fully functioning Software Code(AVR) included with English Font.        Product Summary: OLED SPI Operating Voltage 3-5V Input Voltage (recommended) 5V Input Voltage (limits) 3-5V No. of Pins 6 Power Pins 2(VCC,GND) LED colour Yellow and Blue |||||| & |||||| Resolution 128 x 64 View angle >160 Power consumption 0.08w at full screen lit Working temperature -30C ~ 70C Control Chip SSD Module size(Approx.) mmx27.1mmx4.1mm Module weight 0.06kg (lb.)

Interface: SPI   GND: Power Gound VCC: 2.2V-5.5V SCL: CLK clock (High level 2.2V-5.5V) SDA: MOSI data (High level 2.2V-5.5V) RST: MOSI data (High level 2.2V-5.5V) D/C: Data/Command (High level 2.2V-5.5V)   Feature:   Color: Blue Resolution: 128x64 Power: 0.06W Wide power supply range: DC 3V-5V Temperature: -30°C to 70°C Dimension: x 27.1 mm (LW) Compatible with 3.3V and 5V control chip I / O level OLED internal drive chip: SSD136   Package included:   1 x White SPI OLED display

3.3V-5V 0.96" LCD Modules SPI 128X64 SSD OLED LCD Display Module Arduino CLK MOSI STM32/AVR/51 Mmm Features: What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Specifications: No backlight, the display unit can be self-luminous LED colour: yellow and blue High resolution: Viewing angle:> 160 Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc. Ultra-low power consumption: full screen lit 0.08W, 0.06W normal full-screen display of Chinese characters Wide voltage support: without any modification, directly supports 3V ~ 5V DC Working temperature: -30 C ~ 70 C Minimum occupancy on Earth IO port display: The SPI communication, as long as the two IO ports will be able to drive! Driver IC: SSD No font: take the word with modulo software Size Reference Module volume (generous): 27.0MM * 27.0MM * 4.1MM Please Note: Due to hand measure, the size may have 1-4 cm error Due to Different Monitor, the color may have difference Package Included: 1x LCD Modules 3.3V-5V 0.96" LCD Modules SPI 128X64 SSD OLED LCD Display Module Arduino CLK MOSI STM32/AVR/51 Mmm 100% perfectly working, will be properly checked before shipment. For new users: ------------------- if you are new users we created a git hub with required library, please visit it, read the read me file and follow the instructions, then you will be able to setup OLED

Package Includes:         1 pc X 0.96 inch OLED LCD module Features No backlight, the display unit can be self-luminous High resolution: Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc. (a lot of routines for reference) Ultra-low power consumption: full screen lit 0.08W, normal full-screen characters 0.06W (far below the TFT, LCD and other technologies) Wide voltage support: without any modification, directly supports 3V ~ 5V DC Working temperature: - ℃ IO port occupies minimal display: The IIC communication, as long as the two IO ports will be able to drive! Note:   I f you decide to buy OLED displays, you have to confirm you can make it work, we are going to provide limited support.

5V DC 20 x 4 Lines ASCII Character HD LCD Display With YELLOW Backlight   (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL   Product Overview Product Description: o     LCD display module with  YELLOW Backlight o     SIZE: 20x4 (4 Rows and 20 Characters Per Row) o     Can display 4-lines X 20-characters o     Operate with 5V DC o     Wide viewing angle and high contrast o     Built-in industry standard HD equivalent LCD controller o     Commonly Used in: Student Project, Collage,copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices o     LCM type: Characters   ABOUT This is a basic 20 character by 4 line display YELLOW Backlight. Utilizes the extremely common HD parallel interface chipset (datasheet). Interface code is freely available. You will need 7 general I/O pins(If use

5V DC 20 x 4 Lines ASCII Character HD LCD Display With YELLOW Backlight Product Overview Product Description: o     LCD display module with  YELLOW Backlight o     SIZE: 20x4 (4 Rows and 20 Characters Per Row) o     Can display 4-lines X 20-characters o     Operate with 5V DC o     Wide viewing angle and high contrast o     Built-in industry standard HD equivalent LCD controller o     Commonly Used in: Student Project, Collage,copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices o     LCM type: Characters   ABOUT This is a basic 20 character by 4 line display YELLOW Backlight. Utilizes the extremely common HD parallel interface chipset (datasheet). Interface code is freely available. You will need 7 general I/O pins(If use

5V DC 20 x 4 Lines ASCII Character HD LCD Display With BLUE Backlight (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL   Product Overview Product Description: o     LCD display module with  BLUE Backlight o     SIZE: 20x4 (4 Rows and 20 Characters Per Row) o     Can display 4-lines X 20-characters o     Operate with 5V DC o     Wide viewing angle and high contrast o     Built-in industry standard HD equivalent LCD controller o     Commonly Used in: Student Project, Collage,copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices o     LCM type: Characters   ABOUT This is a basic 20 character by 4 line display BLUE Backlight. Utilizes the extremely common HD parallel interface chipset (datasheet). Interface code is freely available. You will need 7 general I/O pins(If use

LCD display module with blue backlight. Wide viewing angle and high contrast. Can display 2-lines * 16-characters. Small and light appearance, easy and convenient to use. Specifications  LCM type: Characters Character type: 16 * 2 Screen size: cm Character size: mm Driving voltage: 5V DC Backlight: Blue Working temperature: 0 - 50°C For technical assistance (connection diagrams, technical videos, documentation, tutorials), order, shipping issues please email us at . We will try all possible and reasonable means to assist you.

See our ratings Add this shop to my favorites IIC/I2C/TWI/SP​​I Serial Interface 16x2 Blue LCD Display Module ₹ Availability:

Feature ERMSYG-6 is lcd module ks, RoHS, -20°C to +70°C 6:00, Neg Voltage Generator,Parallel and Serial Interface,ST Controller,Popular Size Attribute Gross Weight (kg) Manufacturer EastRising Series Number ERM Part Number(Order Number) ERMSYG-6 Connection Pin Header Display Format 128x64 Dots Sunlight Readable Yes Touch Panel Optional No Outline Dimension 93.0(W)x70.0(H)x12.5(T)mm Visual Area xmm Active Area (W)x(H) Character Size No Diagonal Size 2.9” Dot (Pixel) Size 0.48x0.48mm Dot Pitch 0.52x0.52mm IC Package COB IC or Equivalent ST Interface -bit Parallel, -bit Parallel, 3-Wire Serial SPI Display Type STN-LCD Yellow Green Response Time(Typ) No Contrast Ratio(Typ) No Colors No Viewing Direction 6:00 Viewing Angle Range No Appearance Dark Blue on Yellow Green Brightness(Typ) No Backlight Color Yellow Green Color Backlight Current (Typ) 60mA Power Supply(Typ) 3.3V Supply Current for LCM(Max) 6mA Operating Temperature -℃ Storage Temperature -℃

Venturo Led Scrolling Display top Scrolling Display Company In Trivandrum. colours Red,green.blue White.yellow and rgb Etc indoor And Outdoor Usage aluminium Body. with gi sheet. usb Supported. waterproof And Weather Proof. with Warranty customized Size. 95.26.98.41.04. 94.46.24.40.65. 04.71.40.11.09.9.

Venturo Led Scrolling Display top Scrolling Display Company In Trivandrum. colours Red,green.blue White.yellow Etc indoor And Outdoor Usage aluminium Body. with gi sheet covered. usb Supported. waterproof And Weather Proof. with Warranty customized Size.