Mppt solar controller

SOLAR-MATE MPPT SOLAR CHARGE CONTROLLER(20AMP/12V-24V) MPPT Technology Your key to solar power generation Su-Kam’s MPPT Solar Charger Controller is a system with advanced MPPT (Maximum Power Point Tracking) Technology. The term “charge controller” refers either to a stand-alone device or a control circuitry integrated within a battery pack, battery-powered solar device or a battery recharger. This photovoltaic charge controller is the key component

Please note:  Priority of operation of this Solar inverter is Solar - Grid - Battery.  800VA 12V Solar Inverter with 30A MPPT Charge Controller:- These Solar Power Conditioning Units are a new generation of inverters, changing DC energy from solar modules into clean, stable AC power. These are designed for highest efficiency: Integrated advanced microprocessor technology combined with pure sine wave output makes them the perfect choice to use with high-end electronics and electrical equipment. It is a combination of high quality MOSFETs with MPPT-technology and Solar Prioritization as an additional feature offers you a device that is clearly ahead of its competitors. Features:- • Advanced microprocessor to optimize operation processes • LCD display • Inbuilt MPPT technology charge controller • Solar priorisation • High efficiency • Dual mode operation • Advanced Bi-directional SMPS charger • Pure sine wave output • Good voltage regulation • Over voltage / current protection Technical Specifications:- Kindly forward all your preliminary enquiries/questions about the product and any other doubts to  . You will receive a mail reply or call back at the earliest. Incase you have any query to be resolved for immediate order placement, please call us @   +.

Please note:  Priority of operation of this Solar inverter is Solar - Grid - Battery.  450VA 12V Solar Inverter with 30A MPPT Charge Controller:- These Solar Power Conditioning Units are a new generation of inverters, changing DC energy from solar modules into clean, stable AC power. These are designed for highest efficiency: Integrated advanced microprocessor technology combined with pure sine wave output makes them the perfect choice to use with high-end electronics and electrical equipment. It is a combination of high quality MOSFETs with MPPT-technology and Solar Prioritization as an additional feature offers you a device that is clearly ahead of its competitors. Features:- • Advanced microprocessor to optimize operation processes • LCD display • Inbuilt MPPT technology charge controller • Solar priorisation • High efficiency • Dual mode operation • Advanced Bi-directional SMPS charger • Pure sine wave output • Good voltage regulation • Over voltage / current protection Technical Specifications:- Kindly forward all your preliminary enquiries/questions about the product and any other doubts to  . You will receive a mail reply or call back at the earliest. Incase you have any query to be resolved for immediate order placement, please call us @   +.

Flin MPPT Solar Charge Controller High Efficiency & Advanced Monitoring Capability Flin Solar MPPT Charge Controller is an advanced 60A charge controller that can be connected with up to 3kW of solar panels. Built-

This is special version of our MPPT charge controller with Max Voc=150V. You can use it with Thin Film Panels. All other features are similar to our regular MPPT product. Product video:  https://www.youtube.com/watch?v=TeLXlX3B_5Q Please see our customer feedback profile to boost your buying confidence about this product. A majority of Indian homes already have inverters installed

Product video:  https://www.youtube.com/watch?v=TeLXlX3B_5Q A majority of Indian homes already have inverters installed

Product video:  https://www.youtube.com/watch?v=TeLXlX3B_5Q Please see our customer feedback profile to boost your buying confidence about this product. A majority of Indian homes already have inverters installed

Price negotiable. Both are up & running. Inverter capacity 2KW at 24V (UPS inverter) Solar charge controller capacity MPPT 80A out put maximum at 24V You can run 1 ton AC(while sun is shinging, 9am to 5 pm), Fully automatic washing machine, Ironing and all house hold items. It can be connected to house wiring. It has high surge capacity. The charger can be connected to 2KW panels and works at 24/48V systems Inverter works at 24V Inverter has UPS function and DC prioritized. For more information, pls contact at Whatsappninesixzerofivefivetwotwothreethreethree. Only serious parties may call.

Features: Excellent EMC design Nominal system voltage automatic recognition High efficient Series PWM charging, increases battery life and improves the solar system performance Use MOSFET as an electronic switch, without any mechanical switch Widely used, automatically recognizes day/night Graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu display and operation Humanized design of browser interface, for convenience of operation Full control parameters setting and modification, diversified load control mode Gel, Sealed and Flooded battery type options Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve battery life Electronic protection from overheating, overcharging, over discharging, over load, and short circuit. Reverse protection: any combination of solar module and battery

Please note:  Priority of operation of this Solar inverter is Solar - Battery - Grid.  Technical Specifications:- Mains Input Nominal input 230V AC, 50 Hz Input Voltage cut off Computer mode V AC Normal mode V AC Input voltage higher cut off V AC Input connection 3 pin plug (15A) Output: Inverter Mode Output voltage (VAC) % Output power (VA) 500 Power factor 0.8 lag to unity Output frequency (Hz) Output voltage waveform Sine wave Output connection 3 pin outlet, 15 A Output: Mains Mode Same as input Other Specifications Efficiency 85% Transfer time 15 milliseconds LCD indication Status of UPS Audible alarm Battery low, Mode changeover Noise level Less than 50 dB Battery Voltage 12V Battery capacity – recommended (AH) 300 Typical Low Voltage Alarm Voltage (V) 11.0 Typical shut down battery voltage (V) 10.8 Charging current Constant current boost & trickle charging Dimension 297 (W) x 371 (D) x96 (H) mm Net weight 5.5 Kgs

System rating 25 Amp @ 12 Volt, 24 V Charging current (max) 25 Amp Panel Support single battery - up to 540 watts double battery - up to 1000 watt Technology mppt Wire Size (max) 4 sq mm https://bit.ly/2SuNNUv

Technical Specifications:- Mains Input Nominal input 230V AC, 50 Hz Input Voltage cut off Computer mode V AC Normal mode V AC Input voltage higher cut off V AC Input connection 3 pin plug (15A) Output: Inverter Mode Output voltage (VAC) % Output power (VA) 500 Power factor 0.8 lag to unity Output frequency (Hz) Output voltage waveform Sine wave Output connection 3 pin outlet, 15 A Output: Mains Mode Same as input Other Specifications Efficiency 85% Transfer time 15 milliseconds LCD indication Status of UPS Audible alarm Battery low, Mode changeover Noise level Less than 50 dB Battery Voltage 12V Battery capacity – recommended (AH) 300 Typical Low Voltage Alarm Voltage (V) 11.0 Typical shut down battery voltage (V) 10.8 Charging current Constant current boost & trickle charging Dimension 297 (W) x 371 (D) x96 (H) mm Net weight 5.5 Kgs

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar.

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. IF U GOT ANY PROBLEM PLEASE CALL TO THIS NUMBER ,  BEFORE CONTACTING , WE CAN SOLVE THE PROBLEM..:)

SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)  -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load.