Mppt solar power controller

SOLAR-MATE MPPT SOLAR CHARGE CONTROLLER(20AMP/12V-24V) MPPT Technology Your key to solar power generation Su-Kam’s MPPT Solar Charger Controller is a system with advanced MPPT (Maximum Power Point Tracking) Technology. The term “charge controller” refers either to a stand-alone device or a control circuitry integrated within a battery pack, battery-powered solar device or a battery recharger. This photovoltaic charge controller is the key component

Flin MPPT Solar Charge Controller High Efficiency & Advanced Monitoring Capability Flin Solar MPPT Charge Controller is an advanced 60A charge controller that can be connected with up to 3kW of solar panels. Built-

Product video:  https://www.youtube.com/watch?v=TeLXlX3B_5Q A majority of Indian homes already have inverters installed

Product video:  https://www.youtube.com/watch?v=TeLXlX3B_5Q Please see our customer feedback profile to boost your buying confidence about this product. A majority of Indian homes already have inverters installed

This is special version of our MPPT charge controller with Max Voc=150V. You can use it with Thin Film Panels. All other features are similar to our regular MPPT product. Product video:  https://www.youtube.com/watch?v=TeLXlX3B_5Q Please see our customer feedback profile to boost your buying confidence about this product. A majority of Indian homes already have inverters installed

Features: Excellent EMC design Nominal system voltage automatic recognition High efficient Series PWM charging, increases battery life and improves the solar system performance Use MOSFET as an electronic switch, without any mechanical switch Widely used, automatically recognizes day/night Graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu display and operation Humanized design of browser interface, for convenience of operation Full control parameters setting and modification, diversified load control mode Gel, Sealed and Flooded battery type options Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve battery life Electronic protection from overheating, overcharging, over discharging, over load, and short circuit. Reverse protection: any combination of solar module and battery

SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)  -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load.

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar.

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. IF U GOT ANY PROBLEM PLEASE CALL TO THIS NUMBER ,  BEFORE CONTACTING , WE CAN SOLVE THE PROBLEM..:)

MPPTAmps 12V/24V S olar  Charge Controller MPPTAmps 12V/24V S olar  Charge Controller MPPT series solar charge controllers are designed and engineered to prevent  your solar-powered battery from overcharging and excessive discharging,  therefore protect your investment and extend the battery life. Equipped with  MPPT (Maximum Power Point Tracking) technology, this 30 amp charge  controller ensures that your battery will reach its maximum charging  capacity by sampling the output of the cells and applying a resistance  (load) to optimize the ideal voltage and current conditions, therefore  maximize the power gain from the solar panel for any given environmental  conditions, resulting

SPECIFICATION: W. INVERTER W. SOLAR PANEL WITH 10 METER CABLE 3.) 12 V 150 AH LEAD ACID BATTERY 4.) 12 V 15 A CONTROLLER 5.) 2 AC OUTPUTS 6.) ECO FRIENDLY POWER SYSTEM 7.) LOW CARBON POWER LIGHTING SYSTEM PRODUCT IS BRAND NEW, UNUSED, JUST MINOR SCRATCHES N 1 MINOR BREAK WHICH HAS BEEN REPAIRED. FOR BETTER UNDERSTANDING PLEASE CALL/ WATSAPP ON: BEFORE PAYMENT.

Solar Charge Controller 30Amp/12V-24V-48V PWM Technology Su-Kam’s Solar Charger Controller is a system with advanced MOSFET based PWM Technology. The term “charge controller” refers either to a stand-alone device or a control circuitry integrated one within a battery pack, battery-powered solar device or a battery recharger.  The controller is for off-grid solar systems. This protects the battery from getting over charged using the solar module and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance.  The comprehensive self-diagnostics and electronic protection functions prevent damage from installation mistakes or system faults. Features: Excellent EMC design Nominal system voltage automatic recognition High efficient Series PWM charging, increases battery life and improves the solar system performance Use MOSFET as an electronic switch, without any mechanical switch Widely used, automatically recognizes day/night Graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu display and operation Humanized design of browser interface, for convenience of operation Full control parameters setting and modification, diversified load control mode Gel, Sealed and Flooded battery type options Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve battery life Electronic protection from overheating, overcharging, over discharging, over load, and short circuit. Reverse protection: any combination of solar module and battery Download Catalogue Send Enquiry Patent/Trademark Information: Trademark TM Design Registration No Copyright © Su-Kam Power Systems Ltd. Technology Patent Patent Protected

Solar Charge Controller 15Amp/12V-24V-48V  PWM Technology Su-Kam’s Solar Charger Controller is a system with advanced MOSFET based PWM Technology. The term “charge controller” refers either to a stand-alone device or a control circuitry integrated one within a battery pack, battery-powered solar device or a battery recharger.  The controller is for off-grid solar systems. This protects the battery from getting over charged using the solar module and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance.  The comprehensive self-diagnostics and electronic protection functions prevent damage from installation mistakes or system faults. Features: Excellent EMC design Nominal system voltage automatic recognition High efficient Series PWM charging, increases battery life and improves the solar system performance Use MOSFET as an electronic switch, without any mechanical switch Widely used, automatically recognizes day/night Graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu display and operation Humanized design of browser interface, for convenience of operation Full control parameters setting and modification, diversified load control mode Gel, Sealed and Flooded battery type options Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve battery life Electronic protection from overheating, overcharging, over discharging, over load, and short circuit. Reverse protection: any combination of solar module and battery Download Catalogue Send Enquiry Patent/Trademark Information: Trademark TM Design Registration No Copyright © Su-Kam Power Systems Ltd. Technology Patent Patent Protected

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.rajivihaan.com

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Please contact us at    or visit our website for more details:  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com