Amplifier watts rs

Amplifier and 100 watts speaker 2 nos, 8 inch woofer for sale.. amplifier need a minor service. price negotiable

4way speaker capacity WATTS AMPLIFIER Fm, AUDIO IN, USB & MIC along with 2 8inch speaker super sound effect like home theater for just rs

IT'S A REAL POWERFUL STEREO AMPLIFIER KIT EVERYONE CAN MAKE YOU NEED A TRANSFORMER OF ABOUT 5AMP.12 VOLT THE POWER OUTPUT DEPENDING ON TRANSFORM IN 7AMP 12 TO 14 VOLT THE OUTPUT IS ABOUT 250 TO 300 RMS YOU NEED 10" TO 12" INCH SPEAKERS 100+ 100watt 2N3055 specifications: Polarity = NPN, IC = 15 Amp.(current) VCEO = 60 Volts, hFE = 20 (min), 70 (max) @ IC = 4 Amp, and VCE = 4 Volts, Safe Operating Area = 2.87 Amp × 40 V for 1 second pulse. fT = 2.5 MHz (min), RƟjc = 1.52 degree C/W, PTC = 115 Watts. NOTE: PRODUCTS MAYBE CHANGE DEPENDING ON STOCKS

IT'S A REAL POWERFUL STEREO AMPLIFIER KIT EVERYONE CAN MAKE YOU NEED A TRANSFORMER OF ABOUT 5AMP.12 VOLT THE POWER OUTPUT DEPENDING ON TRANSFORM IN 7AMP 12 TO 14 VOLT THE OUTPUT IS ABOUT 250 RMS YOU NEED 10" TO 12" INCH SPEAKERS 100+ 100watt 2N3055 specifications: Polarity = NPN, IC = 15 Amp.(current) VCEO = 60 Volts, hFE = 20 (min), 70 (max) @ IC = 4 Amp, and VCE = 4 Volts, Safe Operating Area = 2.87 Amp × 40 V for 1 second pulse. fT = 2.5 MHz (min), RƟjc = 1.52 degree C/W, PTC = 115 Watts. NOTE: PRODUCTS MAYBE CHANGE DEPENDING ON STOCKS

Condition as new, Remote not available. The Marantz PM7200 Stereo Integrated Amplifier offers music enthusiasts uncompromising audiophile sound quality and superior flexibility of operation. It delivers 2 x 95 Watts (RMS into 8 Ohms), rising to 155 watts with 4 Ohm speakers. A single push-pull amplifier, symmetrical circuitry withindependent heat sink, anti-resonant, metal front panel and hand selected customized components including HDAM, assuring an extremely dynamic sound reproduction with accurate tonal and image balance. It offers Class A operation for distortion-free sound at low volume levels and gold-plated in- and output terminals. With full system remote control operation, the PM7200 is the ideal center piece for a true high-end music system. 95 watts per channel power output (into 8 ohms) 155 watts per channel (into 4 ohms) 25 watts pure class A operation HDAM (High Definition Amplifier Module) fully discrete copper-shielded output stage Premium-quality parts and construction for superb sound quality Seven source inputs including moving magnet (MM) phono input Remote control operation including volume adjustment

Marantz PM5005 Stereo Integrated Amplifier Featuring premium audiophile design at an affordable price, the Marantz PM5005 stereo integrated amplifier features all-analog circuitry from input to output, and delivers wide frequency response, high dynamic range along with true low impedance drive capability and is rated to handle both 8 ohms and 4 ohms speakers. Featuring current feedback power amplifier circuitry (a Marantz innovation), the power amplifier section also features pure discrete analog circuitry along with multiple high current discrete power output devices that are easily able to handle lower impedance loads and deliver high instantaneous peak current capability. Rated at 40 watts per channel into 8 ohms and 55 watts per channel into 4 ohms, the PM5005 features A and B speaker outputs, for two sets of stereo speakers, or for bi-wiring with compatible stereo speakers. The deluxe remote control provides discrete source input buttons, and includes additional buttons for direct control of the matching Marantz CD5005 player and Marantz Network Audio Players. Current Feedback Discrete Power Amplifier The PM5005 features a power amplifier section based on our renowned current feedback technology, a Marantz innovation that debuted on our very first power amplifier. High current discrete power output devices mounted on a generously-sized aluminum heat sink together provide high instantaneous peak current capability, and are easily able to handle dynamic bursts into lower impedance 4 ohm speaker loads (the current capacity for each amplifier channel is a substantial 16 amps). Wide Range of Connectivity Options   Veteran audiophiles and new generation music lovers both know that the sonic allure of vinyl records often can't be matched by digital audio sources, and the PM5005 includes multiple analog inputs including a MM (moving magnet) phono input. There are also dual recording inputs and outputs, along with a headphone amplifier jack on the front panel, and the high grade speaker connectors can accept multiple speaker cable termination types. The audio input and output jacks are all gold plated for maximum signal integrity. Source Direct Function To ensure the shortest signal path and the highest fidelity, the PM5005 features our Source Direct function, which bypasses the tone control and loudness control circuitry. Discrete amp Fully Discrete Volume Amplifier Circuit The volume amplifier circuit features fully discrete circuitry (no op amp chips in the signal path) for the widest bandwidth, lowest distortion, and highest dynamic range. Elegant Remote Control The elegant remote control includes additional function buttons that let you control a Marantz CD player and a Marantz Network Audio Player, for total system control with a single remote. Versatile Remote Control Options The PM5005 features remote control input and output jacks that let you hard wire the amplifier directly to a Marantz CD player, which in turn can be hard wired to a Marantz Network Audio Player. For example, you can place a Marantz CD player on an open shelf for easy access, and place the PM5005 and a Marantz Network Audio Player tucked away in a cabinet and hidden from view, and control all 3 units with a single remote, which helps to eliminate component clutter. 60+ Years of Audiophile Heritage Founded in 1953, Marantz has a long and rich history of designing audiophile components that have been embraced by music lovers and critical listeners around the world. Because Music Matters so much in our lives, the PM5005 carries on our long tradition of delivering a superlative music listening experience.

i want to sell Ahuja Amp 250 watts for Rs 7500/- only. contact Mr. Nevis Gonsalves

I want to sell my car JBL subwoofer watts and Prov watts 4 Channel Amplifier good condition which is rarely used along with wire kit at RS.

Award winning DENON AVR X 2000 7.1 channels Receiver Amplifier Wharfedale (England) Diamond 10.4 Floor standing speakers. 120 Watts Both purchased new with Bill. Packaging available. Denon Rs.38,000/- Wharfedale Rs.37,000/- Selling since upgraded.

VERY HEAVY AMP BRAND NEW FULL 1 YEAR WARRANTY WITH GST BILL GOOD BASS GAURANTEED Reason for Selling - I sold my car:(4-channel car amplifier 70 watts RMS x 4 at 4 ohms 100 watts RMS x 4 at 2 ohms 200 watts RMS x 2 bridged 4-ohm stable in bridged mode Adjustable low-pass filter (50-250 Hz) Switchable high-pass filter (80 Hz) Selectable bass boost (0, 6, 12 dB at 60 Hz) Preamp inputs8-gauge power and ground leads recommended — wiring and hardware not included with amplifierfuse rating: 25A x 217-3/4"W x 2-1/16"H x 7-13/16"D

C2i_Inv_ Technical Pro AX Amplifier Series AX-Watt of peak power 2U Professional 2CH Channel Power Amplifier, Black (Stepdown Converter required to Reduce Input Voltage, from 240V to 120V. Please Match a converter with this product before Attempting to Switch on) -Watt peak power, 600 watts @ 2 ohms, 460 watts @ 4 ohms, 240 watts @ 8 ohms Inputs: RCA, Outputs: Banana binding post, Dual cooling speed fans, Iridescent blue LED meter, Power, Level & Clipping indicators per channel Frequency Response: 20hz-20KHz, Signal to Noise Ratio: 79dB, Input Impedance: 10 k ohm unbalanced, Dimensions: 19 x 3.5 x 8 Inches, 110V

ALPINE V12 series digital car mono block amplifier MRD-M which is capable to drive 4 No's single voice coil subwoofers at a time. RMS watts at 4 ohms is 500 RMS watts at 2 ohms is RMS watts at 1 ohm is Very very powerful & hard hitting!!! only 8 months used v12 digital amplifier

Watt RMS MOSFET Stereo Hi Power Amplifier Assembled High Quality Sound Effects Specifications for the Watt RMS MOSFET Stereo H i Power Amplifier Power rating of Watts RMS into 4 Ohms Two Channel Powe r Supply -+96 volt Total 40 power Mosfet Transistors Speaker Protection and soft-start Stereo watts Bridge watts Mono Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (10Hz to 20Khz) Assembled Time 10 Days

4440 audio board. Best deal by Rashri This is a 100 watts (RMS) 4440 audio amplifier It has 2 ic and each ic outputs 50×2 =100 watts rms The ic's in this 4440 amplifier is by original (sanyo) Its a geniun product suitable for home, car, diy, Audio amplifiers.  The amplifier runs on 12 volt dc. We will also give voltage regulator (7805)5 volt Regulator ic for operating mp3 decoder module With the amplifier. Buy the product from our Store to get the geniun and quality product. Free 3 potentiometers (2 x 100k & 1x 47k) and 1x 7805 IC In case of any query/clarification, email to rashri2003@gmail.com

EUROPOWER EP Professional -Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology 2 x Watts into 2 Ohms; 2 x Watts into 4 Ohms; Watts into 4 Ohms (bridge mode) ATR (Accelerated Transient Response) technology for ultimate punch and clarity Switchable limiters offer maximum output level with reliable overload protection Detented gain controls for precise setting and matching of sensitivity Precise Power, Signal and Clip LEDs to monitor performance XLR and 1/4" TRS input connectors for compatibility with any source The EP builds on the incredible legacy of our  EP, which is one of the best-selling power amps

Nakamichi Stereo amplifier & Cd player with remote for sale in excellent condition Only serious Buyers call Timepassers Kindly Excuse. Description The IA-2 with Nakamichi's exclusive Harmonic Time Alignment circuitry delivers an extraordinary 55 watts per channel into 8 ohms. It is constructed using nothing but the finest components, selected for use only after extensive testing and evaluation. As with the IA-1, the preamplifier section is fully discrete, and the power amplifier section is capable of a hefty 16 amperes of peak current, which makes robust, distortion free listening possible with virtually any loudspeaker. Specifications Power output: 55 watts per channel into 8 ohms (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Input sensitivity: mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 70dB (MC), 82dB (MM), 105dB (line) Weight: 12.5kg

Onkyo Integra Stereo Amplifier 100 Watts Per Channel 18 kg weight Hi END AMPLIFIER Sanjay /// Salem

Up for sale one of the finest home theater receivers by Marantz with 140W X 5 Channel amplifier. You can use it strictly as a wonderful sounding 5.1 channel amplifier for your home theater set up and music system. It was the flagship top of the line receiver from Marantz. Still one of the most musical Home Theater receiver around. Flexible to add your own front two to make it 7.1 set up. The built quality is second to none. Very hearvy. Used it as Home Theater amplifier controlled by the receiver for Blu-Ray set-up and it sounds fantastic in both Home Theater and music. Heavy weight. Comes in at 27kgs From Marantz: SR-14 DIGITAL SURROUND RECEIVER Engineered to the utmost standards, the SR-14E redefines the state-of-the-art in audio/video receiver performance. It delivers the legendary sound quality that has made Marantz the number one choice of the most discriminating audiophile and home theater enthusiasts. FEATURES 140 watts X 5 Channels (8 Ohms) THX Surround EX decoding for unsurpassed surround sound home theater realism Dolby Digital and DTS compatibility 192kHz/24-bit decoding for highest possible fidelity Three sets of component video inputs THX post-processing HDCD decoding and processing Connections for external stereo amplifier Extensive array of analog and digital audio and video inputs and outputs RF laser disc player input AM/FM tuner with Gyro Touch Tuning and 50 station presets Six-channel direct inputs and 7.1 channel preamp outputs Multi-room, multi-source function for both audio and video High Definition Amplifier Module (HDAM) discrete preamp output stages DSP circuitry operates entirely in the digital domain for maximum fidelity Easy to use on-screen menus Source Direct switch bypasses tone controls for purest audio quality

Ships within 12 Business Days. Genuine Import from USA. First we designed the UAM2, the extremely popular audio amplifier module that provides 20 watts of clean audio with virtually no heat... or heatsink! People loved it, and "stuck" them everywhere, from the back of speakers to inside their custom equipment to drive speakers. Last year saw the introduction of the "big brother" of the UAM2, our UAM4. The UAM4 upped the ante; this little 2.5" board provided 42 watts of stereo from a single SMT device! Just like the UAM2, people fell

Good quality F&D Brand Amplifier for sale. 800 Watts PMPO, Two speakers can be attached Bass Treble Control and one Base Speaker output. Good sound output.