Watts amplifier rms power

power amplifier and speaker. brand new 1100 watts JBL. sony power amplifier. 4/3 channel

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 7 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Branded components): All resistors (1% metal film)  Power resistors (CRC) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) Main Heat Sink required (100 mm x 260 mm x 32 mm - 1 No.) - NOT INCLUDED. Note:- Amplifier Output Power 350 Watt @ 8 Ohms and 550 Watt @ 4 Ohms (Power supply: Volt 7 Amps) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors,) Rs./- Shipping charge extra. Contact details:- E-Mail: Mob. No.:

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Amplifier Kit with Main heat sink and Power Supply Kit): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply Transformer required: Volt 5 Amps- NOT INCLUDED) With Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 8 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 2 x 150 Watts @ 8 Ohms and 2 x 250 Watts @ 4 Ohms. Required Power Supply transformer Volts, 10 Amps (Not Included). Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- El. cr ) Fastron connectors Silpad insulators Silver Mica compensation capacitors (Manufacturer:Kemet/ACE) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors. Electrolytic Capacitors (Manufacturer: Keltron) Note:- Amplifier Output Power 2 x 150 Watt @ 8 Ohms and 2 x 250 Watt @ 4 Ohms (Power supply: Volt 10 Amps)  Contact details:- E-Mail: Any Query Please call on: Mob. No. 

PCB for High power output PA Series Amplifier, provides superb & Power full sound quality. With  2SCSA output devices the amp will put out close to 400 WATTS @ 8 OHMS and 800 Watt @ 4 OHMS.  Size 94 mm X 260 mm. FR4 Glass epoxy 1.6 mm THK Board 70  Microns copper. Included Schematic & BOM. Qty- 02 Nos. (TWO ONLY) PCB. FOR STEREO Note:- Amplifier Output Power 400 Watt @ 8 Ohms and 80 Watt @ 4 Ohms. We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Rs. only) Contact details:- E-Mail: Mob. No.

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit): All resistors (1% metal film) Power resistors Faston connectors Silpad 400 insulators Silver Mica compensation capacitors MJE drivers MJL output transistors (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors Main Heat Sink (100 mm x 182 mm x 19 mm - 1 No.) and Heat Sink for LME No. Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 5 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail:

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  2SCSA output devices. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit without Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors (Manufacturer: Toshiba ) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 250 Watt @ 8 Ohms and 400 Watt @ 4 Ohms (Power supply required: Volt 6 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Contact No.: Mob. No. 

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 8 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Reputed Brands component): All resistors (1% metal film)  Power resistors (Stead) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) MAIN HEAT SINK INCLUDED. Contact details:- E-Mail: Mob. No.

CAR USE ONLY  SMPS POWER SUPPLY(12V DC TO V) IDEAL FOR   200WATT RMS  SUB WOOFER AMPLIFIERS FOR USE IN CAR         IDEAL FOR 200 WATT,100 WATT MOSFET AMPLIFIERS        Construction is of heavy duty type you can extract maximum power out, without distortion at full volume levels.   ac to dc (230v to dc v dc and other type of smps assembling please contact me whatsaap

specification 1. Average Power Output/CH into 4 Ohms, 4 Channels Driven /10Hz~40kHz, 0.5% THD 85W X 4 or 170W X 2Ch /1kHz, 10% THD 250W X 4Ch or 500W X 2Ch (Total Harmonic Distortion (THD) Amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 1% is inaudible.) 2. Low Pass Filter (VARIABLE) 40Hz ~ 150kHz 3. High Pass Filter (VARIABLE) 80Hz ~ 1.2kHz 4. Output of Bridged (BTL) Operation into 4 Ohms /1kHz, 1% THD Watts 5. Frequency Response (-1dB) 10Hz ~ 40kHz 6. Signal to Noise Ratio ("A" WTD) >100dB 7. Input Sensitivity 100mV ~3V 8. Input Impedance 22k Ohms 9. Operation Voltage (Negative Ground) DC 12V 10. Speaker Impedance / Stereo Driven 4 Ohms 11. Fuse Rating 40A X 1 12. Dimension (WxHxD)mm 260X58X320 Weight 3.2KG

Spritofindia Welcomes You at our store !! used Sony Xplod 500W Power Amplifier 4/3 Channel Power Amplifier XM-504Z Key Features Amplifier Type Multi Channels Channels 4 Input Voltage 10.5 volt Bridgeable Not Bridgable RMS Power at 2 Ohms 60 W x 4 RMS Power at 4 Ohms 50 W x 4 Performance Frequency Response 5 Hz - 50 Hz Signal to Noise Ratio 100 dB THD at Rated RMS Power 0.01 % Crossover / Equalizer Bass Boost Without Bass Boost Technical Features MOSFET Circuitry Yes 3 Way Ready No Dimensions Width in. Height 2.25 in. Quantity one of the Used product as shown

Call for discounts upto 6% This a True 500w RMS Audio Amplifier, Needs a Transformer, 7 Amp. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description 8 Transistor Stereo Amplifier, High Power 500w RMS output. The best part about the kit is that it is made of individual components and not IC's, which means if any thing goes wrong it can be easily serviced and components can be replaced instead of trying to find a Specific IC. Also all the powersupply components are built in, Simply need to add a Transformer and it will work. You can also add external volume and bass controller if you need to.  Please make sure to add a extra Fuse

Call for discounts up to 6% (i.e. Rs /-).....{ On Payment through select bank                                                                                  Credit and Debit Cards } With Bass, Treble and Volume Control This a True 500w RMS Audio Amplifier, Needs a Transformer, 6.5 Amp. Also works on amp transformer if toroidal. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Also the product assembling takes approx one week. Product Description 8 Transistor Stereo Amplifier, High Power 500w RMS output. The best part about the kit is that it is made of individual components and not IC's, which means if any thing goes wrong it can be easily serviced and components can be replaced instead of trying to find a Specific IC. Also all the powersupply components are built in, Simply need to add a Transformer and it will work. You can also add external volume and bass controller if you need to. Please make sure to add a extra Fuse

Power Output: 75W Max., 50W RMS at 10% THD, 45W RMS at 5% THD Input Channels: 3×Mic. 0.6mV/4.7k, 1×Aux 100mV/330k Frequency Response: Hz ±3dB Signal to Noise Ratio: 55dB Tone Controls Bass: ±10dB at 100Hz Treble: ±10dB at 10kHz Outputs Line: 400mV/3.5k Speaker Outputs: V Digital Player: MP3 Player with USB reader Power Supply: AC: V Hz, DC: V Car Battery Dimensions: W305 × H120 × D305 mm Weight: 7.0kg