Watts amplifier rms

Watt RMS MOSFET Stereo Power Amplifier Assembled High Quality Sound Effects Specifications for the Watt RMS MOSFET Stereo Power Amplifier Power rating of Watts RMS into 4 Ohms Two Channel Total 40 Mosfets caps uF Soft start, Speaker Protection Watts RMS Mono Bridge Connect otal Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) Assembled Time 12 Days

IT'S A REAL POWERFUL STEREO AMPLIFIER KIT EVERYONE CAN MAKE YOU NEED A TRANSFORMER OF ABOUT 5AMP.12 VOLT THE POWER OUTPUT DEPENDING ON TRANSFORM IN 7AMP 12 TO 14 VOLT THE OUTPUT IS ABOUT 250 TO 300 RMS YOU NEED 10" TO 12" INCH SPEAKERS 100+ 100watt 2N3055 specifications: Polarity = NPN, IC = 15 Amp.(current) VCEO = 60 Volts, hFE = 20 (min), 70 (max) @ IC = 4 Amp, and VCE = 4 Volts, Safe Operating Area = 2.87 Amp × 40 V for 1 second pulse. fT = 2.5 MHz (min), RƟjc = 1.52 degree C/W, PTC = 115 Watts. NOTE: PRODUCTS MAYBE CHANGE DEPENDING ON STOCKS

IT'S A REAL POWERFUL STEREO AMPLIFIER KIT EVERYONE CAN MAKE YOU NEED A TRANSFORMER OF ABOUT 5AMP.12 VOLT THE POWER OUTPUT DEPENDING ON TRANSFORM IN 7AMP 12 TO 14 VOLT THE OUTPUT IS ABOUT 250 RMS YOU NEED 10" TO 12" INCH SPEAKERS 100+ 100watt 2N3055 specifications: Polarity = NPN, IC = 15 Amp.(current) VCEO = 60 Volts, hFE = 20 (min), 70 (max) @ IC = 4 Amp, and VCE = 4 Volts, Safe Operating Area = 2.87 Amp × 40 V for 1 second pulse. fT = 2.5 MHz (min), RƟjc = 1.52 degree C/W, PTC = 115 Watts. NOTE: PRODUCTS MAYBE CHANGE DEPENDING ON STOCKS

Watt RMS MOSFET Stereo Hi Power Amplifier Assembled High Quality Sound Effects Specifications for the Watt RMS MOSFET Stereo H i Power Amplifier Power rating of Watts RMS into 4 Ohms Two Channel Powe r Supply -+96 volt Total 40 power Mosfet Transistors Speaker Protection and soft-start Stereo watts Bridge watts Mono Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (10Hz to 20Khz) Assembled Time 10 Days

ALPINE V12 series digital car mono block amplifier MRD-M which is capable to drive 4 No's single voice coil subwoofers at a time. RMS watts at 4 ohms is 500 RMS watts at 2 ohms is RMS watts at 1 ohm is Very very powerful & hard hitting!!! only 8 months used v12 digital amplifier

400 Watt RMS Power MOSFET High End Sub Woofer Power Amplifier Board 400 watts RMS Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 1 Ready to Ship

400 Watt RMS POWER MOSFET Sub Woofer Power Amplifier High End Board Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 10 Assembled Time 7 Days

400 Watt RMS POWER MOSFET Power Amplifier High End Board Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 10 Assembled Time 7 Days

4440 audio board. Best deal by Rashri This is a 100 watts (RMS) 4440 audio amplifier It has 2 ic and each ic outputs 50×2 =100 watts rms The ic's in this 4440 amplifier is by original (sanyo) Its a geniun product suitable for home, car, diy, Audio amplifiers.  The amplifier runs on 12 volt dc. We will also give voltage regulator (7805)5 volt Regulator ic for operating mp3 decoder module With the amplifier. Buy the product from our Store to get the geniun and quality product. Free 3 potentiometers (2 x 100k & 1x 47k) and 1x 7805 IC In case of any query/clarification, email to rashri2003@gmail.com

800 Watt RMS MOSFET Stereo Power Amplifier Assembled High Quality Sound Effects Specifications for the 800 Watt RMS MOSFET Stereo Power Amplifier Power rating of 800 Watts RMS into 4 Ohms Two Channel Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Assembled Time 3 Days

400 Watt RMS POWER MOSFET Power Amplifier High End Board Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 2 Assembled Time 3 Days

400 Watt RMS POWER MOSFET Power Amplifier High End Board Specifications for the 400 Watt RMS MOSFET Power Amplifier Max Power of 420 Watts RMS into 4 Ohms Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) 1.2 volts RMS for full power O/P Max Input Volt Recommend Volt Transformer VA *** Without Heat sink *** Fully Assembled And Tested Board * 4 Assembled Time 3 Days

Condition as new, Remote not available. The Marantz PM7200 Stereo Integrated Amplifier offers music enthusiasts uncompromising audiophile sound quality and superior flexibility of operation. It delivers 2 x 95 Watts (RMS into 8 Ohms), rising to 155 watts with 4 Ohm speakers. A single push-pull amplifier, symmetrical circuitry withindependent heat sink, anti-resonant, metal front panel and hand selected customized components including HDAM, assuring an extremely dynamic sound reproduction with accurate tonal and image balance. It offers Class A operation for distortion-free sound at low volume levels and gold-plated in- and output terminals. With full system remote control operation, the PM7200 is the ideal center piece for a true high-end music system. 95 watts per channel power output (into 8 ohms) 155 watts per channel (into 4 ohms) 25 watts pure class A operation HDAM (High Definition Amplifier Module) fully discrete copper-shielded output stage Premium-quality parts and construction for superb sound quality Seven source inputs including moving magnet (MM) phono input Remote control operation including volume adjustment

Watt RMS MOSFET Stereo Power Amplifier Assembled High Quality Sound Effects Specifications for the Watt RMS MOSFET Stereo Power Amplifier Power rating of Watts RMS into 4 Ohms Two Channel Total Harmonic Distortion is typically %, Signal to Noise Ratio of - 122dB unweighted (20Hz to 20Khz) Assembled Time 7 Days

Johnson Amplifier 15 watts RMS with Volume and Gain,Clean and powerful Distortion footswitch for guitar headphones out,with a semi Electric Guitar black of Grason,with a factory fitted pickup with volume and tone,a low action guitar in working condition going at a low offer up for grabs

ABrand new Stranger 30 Watts RMS Amplifier,with Clean Distortion Reverb/Echo unit with Rating for Echo in mint condition with box compleat.powerful Echo Quality up for grabs.negoitable.

Very heavy JVC subwoofer fitted in MDS box and a matching subwoofer amplifier for sale. Subwoofer is so heavy that cannot be lifted by single person. Fitted original JVC woofer is 12inch ,Double voice coil,Double magnet, each coil is 300 watts rms totally 700w rms power. So very powerful amplifier is necessary for it to drive. So matching amplifier is with it for hometheater purpose. Suitable for medium to large rooms

Stereo Sub woofer Speaker System watts Wood Waterpro of NewWood 4 * 12" Sub-Woofer  4 * 3" magnet Philips Tweeter  Box Height == 37 inch Box Width == inch Box Depth== inch Excellent sound best result low freq. Minimum watts RMS Amplifier require call come and pickup

DPA-370 30 WATTS AC & 12V DC Operation 2 Mic & 1 Aux Input. Built-in MP3 player with USB reader and remote control. Line Output for connecting to a Booster Amplifier. Cut type tone control. Instant transfer to DC Power (Car Battery) if AC power fails. SPECIFICATIONS Power Output 37W Max., 30W RMS at 10% THD, 27W RMS at 5% THD Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels 2 × Mic. 0.5mV/2.5kΩ, 1 × Aux 50mV/330kΩ Frequency Response

  Hi-Fi Stereo audio amplifier module: 2X  TDA2030         Features: 18 Watts+ 18 Watts RMS maximum. Wide-range supply voltage, up to dual 18 Volts DC  100K OHM INPUT IMPEDANCE. X 46 Gain. Short-circuit protection to ground Thermal shutdown Heatsink needed. Description: The TDA2030 is a monolithic integrated circuit in  the Pentawatt ® package, intended for use as a  low frequency class-AB amplifier. Typically it  provides 14 W output power (d = 0.5%) at 14 V/4 Ω. At ±14 V or 28 V, the guaranteed output  power is 12 W on a 4 Ω load and 8 W on an 8 Ω  The TDA2030 provides high output current and  has very low harmonic and crossover distortion. Furthermore, the device incorporates an original  (and patented) short-circuit protection system  comprising an arrangement for automatically  limiting the dissipated power so as to keep the  operating point of the output transistors within  their safe operating range. A conventional thermal  shutdown system is also included. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.       

20 Watts RMS Output ·          8″ Dual Cone full range Speaker ·          Built-in rechargeable Battery ·          Digital Vocal Echo ·          3-Mic inputs (low impedance)/AUX/MP3 Player with SD/USB inputs ·          Line Out & External Speaker output ·          Full functional remote for MP3 player ·          FM with Antenna ·          Separate BASS/TREBLE controls ·          Separate ECHO effects with Echo depth and Echo time controls ·          Battery level indicator – FULL/HIGH/MEDIUM/LOW Battery level indicators ·          Compact size, Moulded grill and all plywood rexine finish ·          Handle provided for ease of carrying ·          Accessories included: AC Lead, Built-in Rechargeable Battery, Remote for MP3 Player, FM Antenna wire       POWER SUPPLY AC 220V 50Hz/ 12V BUILTIN RECHARGEABLE BATTERY POWER OUTPUT 20 Watts RMS SPEAKER TYPE 8″ Full Range Speaker MIC INPUTS 3 x MIC Inputs with Digital Vocal Echo, Aux & MP3 Player with SD/ USB Inputs TONE CONTROLS Bass/ Treble +-10dB OUTPUTS Line Out & External Speaker Out ECHO Echo effects with Echo Depth/ Echo Time controls DIMENSIONS 280W x 165D x 340H mm WEIGHT Kg

Hitachi stereo amplifier HA- watts rms X 4 channel. 8-16 ohms impedience. Transistor amplifier.Fresh piece.Show room condition.Price is negotiable.Led level meter.Silver colour.

The LX10 is the new mini tone monster. The LX10 allows you to get the legendary Laney sound at a very modest price. The LX10 features a single channel with switchable gain – giving you some gain choices from clean all the way up to extreme, a 2 band EQ plus a Shape switch, a tape/CD input for jamming along to your favourite songs and a headphone input for doing so quietly – an all important late night practice consideration, as you never know when inspiration will strike. TUBE LIKE TONES The LX10 delivers an assortment of great tube like tones, great cleans with a tube chime and drive sounds with real punch. The LX10’s performance far outweighs its compact size. For such a small amp to produce such a big sound takes a good speaker and the LX10 is fitted with a custom voiced 5” driver which handles the LX10’s 10-Watts RMS output like a dream and gives you plenty of dynamics and response. MINI TONE MOSTER The LX range takes its design cues from the more aggressive side of life – dark & brooding, the LX10 – a mini tone monster – we dare you to try it. SPECIFICATION Power 10 Watts RMS Inputs Single Jack input Channels Single channel with Drive Switch Equalisation 2 band EQ Drivers 1 x 5" Custom Driver Cabinet Design Conventional Headphone Socket Yes - mini jack CD Input CD/MP3 Input