Humidity sensor module

Uses:Humidity detection, humidity sensors, humidity detection the working voltage 3.3V-5V the output form: DO digital switching outputs (0 and 1) and AO analog voltage output the comparator output signal is clean, good waveform, driving ability, more than 15mA a small PCB board size: 3.2cm x 1.4cm Module Features:  1, using high-quality HR202 humidity sensor;  2, the comparator output signal is clean, good waveform, driving ability, more than 15mA;  3, adjust the temperature distribution position detection threshold;  4, the working voltage 3.3V-5V;  5, the output form: DO digital switching outputs (0 and 1) and AO analog voltage output;  6, a fixed bolt holes for easy installation;  7, a small PCB board size: 3.2cm x 1.4cm;  8, using a wide voltage LM393 comparator.  Product wiring instructions:  1, VCC positive power supply 3.3-5V  2, GND power supply is negative  3, DO TTL switching signal output  4, AO small plates analog output (voltage signal)  Module for use  1, the humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity;  2, by adjusting the potentiometer, for detecting the humidity can change the threshold (i.e. the humidity control), such as the need to control the ambient humidity of 60%,then the corresponding module is transferred to the green light and humidity environment, DO high power output when flat, humidity values below this setting, high output, the green light does not shine;  3, DO output can be directly connected to the microcontroller through the microcontroller to detect high and low, thereby detecting the humidity changes

DESCRIPTION DHT11 Temperature Relative Humidity Sensor Module For Arduino Feature: Can detect surrounding environment of the humidity and temperature DHT11 sensor adopts Humidity measurement range: % Humidity measurement error: +/- 5% Temperature measurement range: 0 C ~ 50 C Temperature measurement error: +/- 2 C Working voltage 3.3V ~ 5V Output mode: digital output Has fixed bolt hole and easy installation PCB size: 3.1 x 1.4cm Package included: 1 x DHT11 Temperature Relative Humidity Sensor Module We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

This DHT11 Temperature & Humidity Sensor features a temperature & humidity sensor complex with a calibrated digital signal output. By using the exclusive digital-signal-acquisition technique and temperature & humidity sensing technology, it ensures high reliability and excellent long-term stability. This sensor includes a resistive-type humidity measurement component and an NTC temperature measurement component, and connects to a high-performance 8-bit microcontroller, offering excellent quality, fast response, anti-interference ability and cost-effectiveness. Digital Output Single Wire Output Stable & long term accuracy Full range temperature compensated       Relative humidity and temperature measurement Calibrated digital signal     Outstanding long-term stability   pins packaged and fully interchangeable DHT11 output calibrated digital signal. It utilizes exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability.  Its sensing elements are connected with 8-bit single-chip computer. Each DHT11 element is strictly calibrated

The DHT22 (RHT03) is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old. Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the right most pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin! Features: Low cost 3 to 5V power and I/O 1-1.5mA measuring current uA standby current 2.5mA max current use during conversion (while requesting data) Good for % humidity readings with 2-5% accuracy Good for -40 to 80°C temperature readings ±0.5°C accuracy No more than 0.5 Hz sampling rate (once every 2 seconds) Body size 27mm x 59mm x 13.5mm (1.05″ x 2.32″ x pins, 0.1″ spacing   Feature & Application: High precision Capacitive type Full range temperature compensated Relative humidity and temperature measurement Calibrated digital signal Outstanding long-term stability Extra components not needed Long transmission distance, up to 100 meters Low power consumption 4 pins packaged and fully interchangeable Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

1.DHT series numeric humiture sensor. 2.Humidity measuring range: %RH(0－50℃temperature compensation). 3.Temperature measuring range: .Humidity measurement accuracy: ±5.0%RH. 5.Temperature measurement accuracy: ±2.0℃. 6.response time: 7.low power consumption. 8.Size:2.3cm x 1.2cm x 0.5cm. = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

DHT11 Arduino Temperature and Humidity Sensor Module + Dupont cable Description This is DHT11 sensor adopts module can detect surrounding environment of the humidity and temperature.
 Humidity measuring range: % Accuracy: +-5%  
Temperature measurement range: 0 -50℃ Accuracy: +-2 degrees 
 Supply voltage 3.3 V-5 V 
 Output digital signal Data port has pull-up resistor 
 Size: mm Package Info 1Pc X DHT11 Module Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback.

DHT11 Arduino Temperature and Humidity Sensor Module + Dupont cable Description This is DHT11 sensor adopts module can detect surrounding environment of the humidity and temperature.
 Humidity measuring range: % Accuracy: +-5%  
Temperature measurement range: 0 -50℃ Accuracy: +-2 degrees 
 Supply voltage 3.3 V-5 V 
 Output digital signal Data port has pull-up resistor 
 Size: mm Package Info 1Pc X DHT11 Module Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are  Indian speed post   Feedback: ·         In case you find any problem

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

BRAND NEW High quality Rain drops Detection sensor module/ weather/ Humidity sensor for arduino        Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free Dupont cables Shipping through BlueDart/Aramex/FedEx                                   For more information on our products and shipping please email us at Please note that All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items. These are imported electronic items and can easily get damaged by mishandling or wrong connections. Please Buy only if you can understand the product and its working well. We do not give any documents or connection diagram along with the product. All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us

BRAND NEW High quality  Rain drops Detection  sensor module/ weather/  Humidity sensor  for arduino         Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free  Dupont cables

Soil moisture humidity detector sensor module soil hygrometer Soil moisture sensor for your plants   Product Description:   ·            100% Brand new and high quality ·            This is a simple water sensor can be used to detect soil moisture when the soil moisture deficit module outputs a high level, and vice versa output low. Use this sensor produced an automatic plant waterer device, so that the plants

Description Specifications: Type:AM. Accuracy resolution:0.1. Humidity range:%RH. Temperature range:-℃. Humidity measurement precision:±2-5%RH. Temperature measurement precision:±0.5℃. 4-pin package. Ultra-low power. No additional components. Excellent long-term stability. All calibration, digital output. Completely interchangeable. Long distance signal transmission. Relative humidity and temperature measurement. Application: HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc. Package Included: 1 X  DHT22/ AM  Digital Relative Humidity & Temperature Sensor Module

Specifications: Type:AM. Accuracy resolution:0.1. Humidity range:%RH. Temperature range:-℃. Humidity measurement precision:±2-5%RH. Temperature measurement precision:±0.5℃. 4-pin package. Ultra-low power. No additional components. Excellent long-term stability. All calibration, digital output. Completely interchangeable. Long distance signal transmission. Relative humidity and temperature measurement. Application: HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc. Package Included: 1 X  DHT22/ AM  Digital Relative Humidity & Temperature Sensor Module

Description This DHT11 Temperature & Humidity Sensor features a temperature & humidity sensor complex with a calibrated digital signal output. By using the exclusive digital-signal-acquisition technique and temperature & humidity sensing technology, it ensures high reliability and excellent long-term stability. This sensor includes a resistive-type humidity measurement component and an NTC temperature measurement component, and connects to a high-performance 8-bit microcontroller, offering excellent quality, fast response, anti-interference ability and cost-effectiveness. Digital Output Single Wire Output Stable & long term accuracy Full range temperature compensated       Relative humidity and temperature measurement Calibrated digital signal     Outstanding long-term stability   pins packaged and fully interchangeable DHT11 output calibrated digital signal. It utilizes exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability.  Its sensing elements are connected with 8-bit single-chip computer. Each DHT11 element is strictly calibrated