Internal ethernet card

Website: www.serversrent.com Mobile: / 080 Hi All We have HP 10GB NETWORK ETHERNET CARD PCI-E 10 Gigabit Ethernet Adapters Network Interface Cards & Converged Network Adapters ATTO FastFrame is an easy-to-understand, comprehensive portfolio of products designed for flexibility and engineered for performance. Quad-, dual-, and single-port Converged Network Adapters and SFP+ Network Interface Cards all include high-quality SFPs, and may also be used with Direct Attach Copper cabling. Single- and dual-port 10GBASE-T cards are built on the industry's first single-chip, low-power 10GBASE-T controller by Intel. All FastFrame adapters include iSCSI support at no additional cost, and all have drivers for Windows servers and workstations, multiple Linux distributions, and Mac OS X. FastFrame enables connectivity solutions ranging from high-performance access to file servers, through connection to industry-leading NAS systems, to switched fully-converged FCoE topologies, without expensive upgrades, add-ons, or hidden costs. NICs are backward compatible (via auto-negotiation) for phased upgrade to 10Gb Ethernet. CNAs, built with ATTO's industry leading Fibre Channel stack, simultaneously support TCP/IP, iSCSI, and FCoE, which may be configured per-port. Data Center Bridging (DCB) provides traffic prioritization required for high quality of service for iSCSI, and for running FCoE converged SANs. For more details, contact us: Mobile: /080- Website: www.serversrent.com No 659, VB Layout, K.R.Puram New Extension, Bangalore-36

Description The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming in Arduino ). An SD card library is not yet included in the standard Arduino distribution. Arduino communicates with both the W and SD card using the SPI bus (through the ICSP header). This is on digital pins , and 13 on the Duemilanove and pins , and 52 on the Mega. On both boards, pin 10 is used to select the W and pin 4 for the SD card. These pins cannot be used for general i/o. On the Mega, the hardware SS pin, 53, is not used to select either the W or the SD card, but it must be kept as an output or the SPI interface won't work. Note that because the W and SD card share the SPI bus, only one can be active at a time. If you are using both peripherals in your program, this should be taken care of by the corresponding libraries. If you're not using one of the peripherals in your program, however, you'll need to explicitly deselect it. To do this with the SD card, set pin 4 as an output and write a high to it. For the W, set digital pin 10 as a high output. The shield provides a standard RJ45 ethernet jack. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Buy Ethernet Shield W5100 for Arduino-AR-143-D at Campus Component. This W5100 chip is a Hardwired TCP/IP embedded Ethernet controller that provides an easier Internet connection to embedded systems. W5100 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. WIZnets Hardwired TCP/IP is the market-proven technology that supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE protocols. W5100 embeds the 32Kbyte internal memory buffer for the Ethernet packet processing. If you use W5100, you can implement the Ethernet application just by adding the simple socket program. It’s a faster and easier way rather than using any other Embedded Ethernet solution. Users can use 8 independent hardware sockets simultaneously. To know more, visit website https://www.campuscomponent.com/products/bb0b06018d/2208614000001835760

FREE SHIPPING, We ship All over India USB to LAN Mbs Ethernet adapter, Lan Adapter, Usb to Lan Rj45 HI-QUALITY FAST SPEED USB TO LAN CONVERTER/CARD/ETHERNET NETWORK ADAPTER + DRIVER CD (BUYERS CAN ALSO REQUEST ZIP FILE OF DRIVERS ONLINE if they don't have cd drive to run driver CD) The USB to LAN Ethernet adapter allows you to connect your PC to an Ethernet Network (LAN) without  requiring a normal Ethernet card. Ideal for older computers which don't have Ethernet ports as standard.  The device is fully compliant with USB and 2.0 specifications and supports full and half  duplex modes.   OVERVIEW 1. USB LAN Jack. 2. Ethernet Network Adaptor. 3. USB2.0 Port for Connector. 4. Easy to use, Fast installation.   DESCRIPTION

Enter E-4S PCI 4 / Four Channel Desktop PC Internal Sound Card   Features Ideal for adding audio and gaming capability to a PC. Compatible with Microsoft Direct Sound 3D. High Quality PC Audio. Supports Rear Side Speakers.   Specifications Type of Sound Card: Stand-Alone Audio Card Internal/External: Internal Port Connectors: 1 x Line In 1 x Mic In 1 x Front Speaker 1 x Rear Speaker Slot Type: PCI OS Supported: Windows® SE, ME, , XP Compliance with APM 1.2, ACPI 1.1, and PPMI 1.1 High-performance single-chip PCI audio acceleration Compliant with PCI PCI specification General Instructions   1.   This item comes along with original invoice. Sales tax is included

Eclipse SEE2 UV150 VGA External Video Card (TRI904050001/04/1). The newly update Eclipse SEE2 UV150 is the easiest and most cost effective way to add a second display and increase productivity. The SEE2 UV150 is a simple external video card that connects to your computer via USB 2.0. Add an additional display instantly without the hassle of installing an internal graphics card. Extend your desktop across multiple displays or select mirroring mode to clone one screen onto the other. Studies show that using two displays can increase efficiency and productivity by 44% over single display use. The SEE2 UV150 can work with all VGA displays and is ideal for screen sizes up to 22. Perfect for most any application including word processing spreadsheets graphic applications email and surfing the web. Supports standard resolutions up to 1600x1200 and widescreen resolutions up to 1680 x 1050. From graphic applications to word processing the SEE2 UV150 applies to everyone from corporate users to home users.

One year old imported from Dubai 3g 4g dual sim only charger kit kat version 2gb ram 8 GB internal memory card slot HD screen 5 mp cam 2mp front cam with flash mega battery back up exchange preferred from dual sim just call don't msg me

Ethernet W Shield Network Expansion Board w/ Micro SD Card Slot for Arduino (Q022) Product Features:. The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board for further development. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). Ethernet shield network expansion board for Arduino. The Arduino ethernet shield allows an Arduino board to connect to the internet It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. Requires an Arduino board (not included). Operating Voltage 5V (supplied from the Arduino Board) Product Features The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board for further development There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). Ethernet shield network expansion board for Arduino The Arduino ethernet shield allows an Arduino board to connect to the internet It is based on the Wiznet W ethernet chip (datasheet) The Wiznet W provides a network (IP) stack capable of both TCP and UDP It supports up to four simultaneous socket connections Use the Ethernet library to write sketches which connect to the internet using the shield Requires an Arduino board (not included) Operating Voltage 5V (supplied from the Arduino Board) Ethernet Controller W with internal 16K buffer Connection Speed Mb Connection with Arduino on SPI port

Enter E-100E Internal PCI Ethernet Mbps LAN Card for Desktop PC     Specifications 32-bit CardBus RJ-45(STP) port x1 Auto-Negotiation for both 100BASE-TX and 10BASE-T Efficient TX/RX FIFO auto management Standards: IEEEu 100BASE-TX, IEEEBASE-T Media Support: RJ-45 UTP cable; Cat.Mbps; Cat.Mbp General Instructions   1.   This item comes along with original invoice. Sales tax is included

MRP Rs. /-. You will Get it Only at Rs. /- So Hurry Up And Buy Now. The Tenda 4G302 Wireless NG/4G Router is made for mobility. The router can turn a 4G/3G network into a high speed WiFi hotspot by plugging an activatedFDD-LTE/TD-LTE/HSPA+/HSPA/HSDPA/ EVDO modem. Plus, it is built with an internal battery for increased mobility. So wherever, whenever you are, you can always instantly set up a WiFi hotspot and share by your companions. It provides an Ethernet port, so that you can connect it to an existing wired network using an Ethernet cable and enjoy Internet activities like surfing, chatting, and streaming video wirelessly. What is more, the battery with capacity of mAH works as a mobile power bank that can provide power supply to your mobile devices like smartphones or pads. Ideal for people who are on the go. >> Easy 3G/4G Sharing By inserting an activated TD-LTE/FDD-LTE USB modem, this n compliant router gives you freedom to roam and still remain connected to the Internet. It is also backward compatible with 3G networks including WCDMA and CDMA . >>Internal mAh Battery Designed with internal mAh battery, the device is able to work for up to 18 hours for regular Internal activities. Meanwhile it can provide power source for your smartphones and tablets. It is good to fully charge a smartphone for 5-6 times. >> Make Wired Wireless Plug an Ethernet cable into the device and connect it to your exisisting wired network, it turns the wired connection into a WiFi hotspot, so that your smartphone, laptop, or tablet can access to Internet and share wirelessly and simultaneously. By inserting an activated TD-LTE/FDD-LTE USB modem, this n compliant router gives you freedom to roam and still remain connected to the Internet. It is also backward compatible with 3G networks including WCDMA and CDMA . Designed with internal mAh battery, the device is able to work for up to 18 hours for regular Internal activities. Meanwhile it can provide power source for your smartphones and tablets. It is good to fully charge a smartphone for 5-6 times. Plug an Ethernet cable into the device and connect it to your exisisting wired network, it turns the wired connection into a WiFi hotspot, so that your smartphone, laptop, or tablet can access to Internet and share wirelessly and simultaneously. Up to 300Mbps WIFI date rate Smart conection easy to extend wireless range Using WISP Support WPA-PSK、WPA2-PSK Standard&Protocol IEEE b,IEEE g,IEEE n,IEEE u Antenna 2* Internal Antenna Button Switch Button;Reset Button;Capacity Indicator Button Power Source Input：(VAC）V；50Hz;Output：(VDC) 5V，1.2A Dimension mm*43.5mm*41.1mm（L*W*H） LED 1* State Indicator;4* Capacity Indicators Also Please We Recommended You To Leave Positive Feedback. If You Have Any Problem About Item You Received, Please Send A Mail To Us on . We will contact you within 24 hours with Satisfied Answer. So Please Don't Leave Negative Feedback Before Contacting Us. We will also leave a positive feedback to you. Thank You Very Much Once Again For Shopping With Sugandh Online.

Kingston Mobilelite G2 Wireless Media Reader Kingston Mobilelite G2 Wireless Media Reader K ingston Digital MobileLite Wireless Flash Reader G2 for Smartphones and Tablets (MLWG2) Offload. Stream. Charge.Connect. Stay Mobile — and Connected Extend mobile storage and stay connected with Kingston’s MobileLite Wireless G2 (MLWG2). The average smartphone only has 70 percent of its capacity available for storage and many tablets don’t include ports — which makes them come up short on storage. MobileLite Wireless G2 adds storage while freeing up your mobile device by letting you offload content to a Flash card or USB drive. MobileLite Wireless G2 creates its own Wi-Fi signal which allows you to stream several movies to different devices simultaneously. It also lets you post photos and videos to social media via Wi-Fi for friends and family. Additionally, the MobileLite Wireless G2 is a battery bank that lets you charge your smartphone up to 2x from a full battery*. With limited battery life on many phones and new operating systems draining batteries, it’s important to be able to give power to your phone at a critical moment. *Based on internal testing using iPhone 5. Battery life varies depending upon the usage and user application functions. Battery is not replaceable. Stay constantly connected with MobileLite Wireless G2. It functions as a portable router with a built-in Ethernet port for broadband Internet on the go. It also has 3G dongle support for direct connections. MobileLite Wireless G2 can also bridge to other Wi-Fi Internet connections when direct connect isn’t an option. MobileLite Wireless is backed by a two-year warranty, free technical support and legendary Kingston reliability. Wireless Media Streamer MLWG2 creates its own Wi-Fi signal. It allows you to stream several movies to different devices simultaneously. Post and share photos and videos via Wi-Fi to social media platforms. Additional Storage for Mobile Users MLWG2 lets you add more storage to your phone or tablet while freeing up your mobile device, by letting you offload content to a Flash card or USB flash drive. Versatile as a Multi-Card Reader It’s Versatile as a standard or wireless USB and card reader for easy data transfer. Supports SD/SDHC/SDXC and microSD/ SDHC/SDXC and standard USB drives. Easy Internet Connection Plus 3G It functions as a portable router with a built-in Ethernet port for broadband Internet on the go. It also has 3G dongle support for direct connections. Bridge to other Wi-Fi Internet connections when direct connect isn’t an option. Portable Battery Backup It is also a charger that lets you charge your smartphone up to 2x from a full battery. The built

K ingston Digital MobileLite Wireless Flash Reader G2 for Smartphones and Tablets (MLWG2) Offload. Stream. Charge.Connect. Stay Mobile — and Connected Extend mobile storage and stay connected with Kingston’s MobileLite Wireless G2 (MLWG2). The average smartphone only has 70 percent of its capacity available for storage and many tablets don’t include ports — which makes them come up short on storage. MobileLite Wireless G2 adds storage while freeing up your mobile device by letting you offload content to a Flash card or USB drive. MobileLite Wireless G2 creates its own Wi-Fi signal which allows you to stream several movies to different devices simultaneously. It also lets you post photos and videos to social media via Wi-Fi for friends and family. Additionally, the MobileLite Wireless G2 is a battery bank that lets you charge your smartphone up to 2x from a full battery*. With limited battery life on many phones and new operating systems draining batteries, it’s important to be able to give power to your phone at a critical moment. *Based on internal testing using iPhone 5. Battery life varies depending upon the usage and user application functions. Battery is not replaceable. Stay constantly connected with MobileLite Wireless G2. It functions as a portable router with a built-in Ethernet port for broadband Internet on the go. It also has 3G dongle support for direct connections. MobileLite Wireless G2 can also bridge to other Wi-Fi Internet connections when direct connect isn’t an option. MobileLite Wireless is backed by a two-year warranty, free technical support and legendary Kingston reliability. Wireless Media Streamer MLWG2 creates its own Wi-Fi signal. It allows you to stream several movies to different devices simultaneously. Post and share photos and videos via Wi-Fi to social media platforms. Additional Storage for Mobile Users MLWG2 lets you add more storage to your phone or tablet while freeing up your mobile device, by letting you offload content to a Flash card or USB flash drive. Versatile as a Multi-Card Reader It’s Versatile as a standard or wireless USB and card reader for easy data transfer. Supports SD/SDHC/SDXC and microSD/ SDHC/SDXC and standard USB drives. Easy Internet Connection Plus 3G It functions as a portable router with a built-in Ethernet port for broadband Internet on the go. It also has 3G dongle support for direct connections. Bridge to other Wi-Fi Internet connections when direct connect isn’t an option. Portable Battery Backup It is also a charger that lets you charge your smartphone up to 2x from a full battery. The built

Fortinet Internal Network Firewall FortiGate-100D series delivers consolidated, fully integrated network security for small and medium businesses, branch offices of large enterprises as well as service provider customer premise equipment (CPE) applications. Accelerated security throughput, high port density, and ease of management enable you to deploy enterprise-class security. An integrated set of essential security technologies protects all of your applications and data. Product Description Fortinet FortiGate 100D - security appliance Device Type Security appliance Bundled Services 1 year FortiCare 8X5 Enhanced Support + 1 year FortiGuard Form Factor External Hard Drive 16 GB x 1 Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Performance Firewall throughput (1518-byte packet size) : 2.5 Gbps ¦ Firewall throughput (512-byte packet size) : 1 Gbps ¦ Firewall throughput (64-byte packet size) : 200 Mbps ¦ Antivirus throughput (proxy) : 300 Mbps ¦ Antivirus throughput : 700 Mbps ¦ IPS throughput : 950 Mbps ¦ VPN throughput (IPSec) : 450 Mbps Capacity Gateway to gateway IPSec VPN Tunnels : 1500 ¦ Client to gateway IPSec VPN tunnels : 5000 ¦ Concurrent sessions : 2500000 ¦ New sessions per second : 22000 ¦ Concurrent SSL VPN users : 200 ¦ Firewall policies : 10000 ¦ Virtual domains : 10 ¦ User licenses : unlimited ¦ Number of FortiAP devices : 32 ¦ Number of FortiToken devices : 1000 Power AC 120/230 V ( 50/60 Hz ) Dimensions (WxDxH) 17 in x 11.5 in x 1.7 in Weight 9.5 lbs Miscellaneous Compliant Standards - UL, VCCI, C-Tick, ICSA IPSec certified, ICSA Firewall certified, cUL, ICSA Antivirus, CB, FCC Part 15 B, ICSA Network IPS Processor / Memory / Storage Hard Drive - - 32 GB x 1 Environmental Parameters Min Operating Temperature - 32 °F Max Operating Temperature - 104 °F Humidity Range Operating - 20 - 90% (non-condensing) Power Power Device - External power adapter Voltage Required - AC 120/230 V ( 50/60 Hz ) Power Consumption Operational - 21.8 Watt General Device Type - Security appliance Bundled Services - 1 year FortiCare 8X5 Enhanced Support + 1 year FortiGuard Width - 9.2 in Depth - 8.8 in Height - 1.7 in Weight - 3.5 lbs Networking Form Factor - External Ports Qty - 16 Connectivity Technology - Wired Data Link Protocol - Ethernet, Fast Ethernet, Gigabit Ethernet Performance - Firewall throughput (1518-byte packet size) : 3.5 Gbps ¦ Firewall throughput (512-byte packet size) : 3.5 Gbps ¦ Firewall throughput (64-byte packet size) : 3.5 Gbps ¦ VPN throughput (512-bit IPSec) : 1 Gbps ¦ Firewall throughput : 5.3 Mpps ¦ VPN throughput (IPSec) : 1 Gbps ¦ VPN throughput (SSL) : 35 Mbps ¦ IPS throughput : 275 Mbps ¦ Antivirus throughput : 65 Mbps ¦ Antivirus throughput (proxy) : 35 Mbps Capacity - Client to gateway IPSec VPN tunnels : 1000 ¦ Gateway to gateway IPSec VPN Tunnels : 200 ¦ Concurrent sessions : 1500000 ¦ New sessions per second : 4000 ¦ Firewall policies : 5000 ¦ Concurrent SSL VPN users : 200 ¦ Virtual domains : 10 ¦ Number of FortiAP devices : 16 ¦ Number of FortiToken devices : 100 ¦ Number of FortiClient devices : 200 Features - 3G/4G USB Dongle Support Expansion / Connectivity Interfaces - 14 x 1000Base-T - RJ-45 ¦ 2 x 1000Base-T - RJ-45 ( WAN ) ¦ 2 x USB - Type A ¦ 1 x Manufacturer Warranty Service & Support Details - Limited warranty - replacement - 1 year - response time: 3 days ¦ Technical support - web support - 1 year ¦ Product info support - e-mail consulting - 1 year ¦ Product info support - web knowledge base access - 1 year ¦ New releases update - 1 year ¦ Virus definitions update - 1 year ¦ Intrusion definitions update - 1 year ¦ URL database update - 1 year ¦ E-mail database update - 1 year ¦ Technical support - phone consulting - 1 year

Upgrade your data and network access all at once. SuperSpeed up. Adopting the latest USB 3.0 technology, the USB 3.0 interface gives you access to SuperSpeed data transfer rates of up to 5Gbps. Here at Anker®, we value your time. Instant expansion. With quick installation, this Anker USB 3.0 PCI-E Card offers a simple solution for connecting to 3 USB 3.0 devices from your standard desktop PC. Gigabit ethernet port. A gigabit ethernet port provides access to local area networks (LAN) with reliable Mbps speeds. System Requirements Windows / Vista / XP. Notes: 1. The PCI-E card is powered by a 4-pin power connector. Please confirm that your computer's motherboard is equipped with a 4-pin power connector plug before purchasing. 2. To achieve maximum USB 3.0 performance, peripherals, cables, and software should all support USB 3.0. 3. To achieve maximum LAN speeds with this product, other computer peripherals should also support 1Gbit ethernet speeds. Product Features USB 3.0 ports (adopting VL805 chip) with transfer rates of up to 5Gbps, backward compatible with USB gigabit ethernet port (RTS chip) gives access to superfast network speeds, compatible with Mbps ethernet. 4-pin connector to power USB devices from your PC's power supply. Supports hot swapping. The PCI-E port only supports PCI-E X1/X16 slots. Package contents: Anker® 3-Port USB 3.0 and Gigabit Ethernet Port PCI-E Card, 7.9in 4-Pin to SATA cable (including connector length), driver CD, instruction manual. Free lifetime technical support and 18-month manufacturer's warranty. Product Specifications USB Type SuperSpeed USB 3.0 PCI-E type Support PCI-E X1 and PCI-E X16 Compatible Windows / Vista / XP

Upgrade your data and network access all at once. SuperSpeed up. Adopting the latest USB 3.0 technology, the USB 3.0 interface gives you access to SuperSpeed data transfer rates of up to 5Gbps. Here at Anker®, we value your time. Instant expansion. With quick installation, this Anker USB 3.0 PCI-E Card offers a simple solution for connecting to 3 USB 3.0 devices from your standard desktop PC. Gigabit ethernet port. A gigabit ethernet port provides access to local area networks (LAN) with reliable 10/100/1000 Mbps speeds. System Requirements Windows 8.1 / 8 / 7 / Vista / XP. Notes: 1. The PCI-E card is powered by a 4-pin power connector. Please confirm that your computer's motherboard is equipped with a 4-pin power connector plug before purchasing. 2. To achieve maximum USB 3.0 performance, peripherals, cables, and software should all support USB 3.0. 3. To achieve maximum LAN speeds with this product, other computer peripherals should also support 1Gbit ethernet speeds. Product Features USB 3.0 ports (adopting VL805 chip) with transfer rates of up to 5Gbps, backward compatible with USB 2.0 / 1.1. 1 gigabit ethernet port (RTS8153 chip) gives access to superfast network speeds, compatible with 10/100/1000 Mbps ethernet. 4-pin connector to power USB devices from your PC's power supply. Supports hot swapping. The PCI-E port only supports PCI-E X1/X16 slots. Package contents: Anker® 3-Port USB 3.0 and Gigabit Ethernet Port PCI-E Card, 7.9in 4-Pin to SATA cable (including connector length), driver CD, instruction manual. Free lifetime technical support and 18-month manufacturer's warranty. Product Specifications USB Type SuperSpeed USB 3.0 PCI-E type Support PCI-E X1 and PCI-E X16 Compatible Windows 8.1 / 8 / 7 / Vista / XP