Rf tx rx

before buying please call me for better service 5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

5.8G 200mW A/V Transmitting/receiving along with a SONY CCD camera with original Sony DSP Chipset. 5.8G is a good choice for avoiding interference for customers using 2.4G radio system Specifications of Tx/Rx system Transmitting unit weight: 34.5g Power input: 12V ± 5% Receiving current: 100mA Transmitting current: 100mA Transmitter Channel number: 8-ch Receiver channel number: 4-ch Antenna gain: 3db Video signal resistance: 75Ω Antenna connection: SMA Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. Sony CCD Camera 1/3 Sony color CCD, 420TVL The minimum illumination 0.5LUX Size: 32X38mm DC12V, 85mA SONY420TVL low illumination (), it is suit to monitor

Brand new, original TURNIGY 2.4Ghz 6 Channel transmitter and receiver of long signal radius range (on line of sight with full battery) Ready stock! Buy with confidence! DESCRIPTION FROM MANUFACTURER: The Turnigy 6X is a great 2.4ghz Transmitter and receiver that uses solid and reliable FHSS spread spectrum technology. The Turnigy 6X has both a nice quality look and feel, especially given it's low price, features include Retract & Flap switches, servo reversing, trims, charging port and Delta Mixing. Turnigy 6X Transmitter Specs: Resolution: Frequency: 2.4ghz ISM Frequency Range Modulation: GFSK Spread Spectrum Mode: FHSS Number of Frequency Channels: 20 Hopping Rate: 125 jump/s Output Power: Working Current: Working Voltage: 1.2v x 4 (AA/Nimh) Dimensions: 200mm x 185mm x 105mm Turnigy XR700 Receiver Specs: Channel: 7 (inc RX Battery Input) Frequency: 2.4g ISM Frequency Range Power: 4.5v ~ 9.6v/ Net Weight: 11.5g Dimensions: 41mm x 28mm x 14mm Requires: 4 x AA Type Battery For Operation We also provide 1 piece of connector band worth rs. 299 free as shown

BRAND NEW, READY STOCK TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) AT AN UNBELIEVABLE PRICE! OFFER VALID TILL STOCK LASTS! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) AT AN UNBELIEVABLE PRICE! OFFER VALID TILL STOCK LASTS! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH GOOD SIGNAL RANGE! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

FAMOUS BRAND "TURNIGY" TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH GOOD SIGNAL RANGE (approx. 0.7 to 1 km on line of sight with full battery)! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW IC Wireless 4 -Channel RF Remote control Transmitter & Receiver Key Kits / Tx - Rx Modules                                                                   Remote control: 1.Operating voltage: DC12V (27A/12V battery x1) 2.Operating Current: 10mA @ 12V 3.Radiated power: 10mw @ 12V 4.Modulation mode: ASK (Amplitude Modulation) 5.Transmitting frequency: 315MHZ (SAW frequency stabilization) 6.Transmission distance:M (Open field the receiver sensitivity -100dbm) 7.Encoder types: fixed code 8. The frequency of this product is 315 mhz. With decoding receiver board 1.The operating voltage DC5V, receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 2.Size: mm There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Module function description: This module has no self-locking function, simple implementation, wireless remote control by pressing a key, The receiver outputs a high level when the corresponding key is pressed. When key is released, the output goes to normal, and each channel is independent of each other. The output of high level can directly drive the relay. VT foot is receiving signal terminal. There is no detailed information. Package Contents: 1 x 4 channel Remote control 1 x 4 channel Receiver Shipping through BlueDart/Aramex/FedEx                          

"LMR-195 flexible 50 Ohm coax cable with PE jacket is rated for a 5.8 GHz maximum operating frequency. This 50 Ohm 0.195 inch diameter and low loss flexible coax cable is built with a shield count of 2 and RF shielding of 90 dB. Fairview Microwave LMR-195 coax is constructed with PE (F) dielectric and a maximum operating temperature of 85 degrees C. Times Microwave LMR-195 coax cable specs for this wire properties can be found on its RF coax cable LMR-195 datasheet PDF specifications above. LMR-195 cable is part of more than one million RF, microwave and millimeter wave parts in stock at Fairview. This Times Microwave low loss LMR-195 coax cable is ready to buy and can be shipped worldwide. Fairview also maintains a wide selection of other radio frequency twinaxial and coaxial cable types that ship same-day from our Allen, TX warehouse in the as with the rest of our other RF/microwave and millimeter wave components."

Package Include: 2X  ATMEGA328P 5V/16M.     Product  description: Mini Pro is a micro-controller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), Eight analog inputs, a 16MHz resonator, a reset button, mounting hole pin head. Technical parameters: 14 Digital input / output ports RX, TX D2-D13 of,    8 analog input port A0 to A7  The TTL level serial transceiver port RX / TX  6 PWM ports, D3,, D5, D6, D9, D10, D11  Using Atmel Atmega328P-AU micro controller   Supports serial download  Support for external 3.3V ~ 12V DC power supply  Support 9V battery-powered clock frequency 16MHz  Dimensions: (mm)

Package Include: 1X  ATMEGA328P 5V/16M.     Product  description: Mini Pro is a micro-controller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), Eight analog inputs, a 16MHz resonator, a reset button, mounting hole pin head. Technical parameters: 14 Digital input / output ports RX, TX D2-D13 of,    8 analog input port A0 to A7  The TTL level serial transceiver port RX / TX  6 PWM ports, D3,, D5, D6, D9, D10, D11  Using Atmel Atmega328P-AU micro controller   Supports serial download  Support for external 3.3V ~ 12V DC power supply  Support 9V battery-powered clock frequency 16MHz  Dimensions: (mm)